smartmontools: Control and monitor storage systems using the S.M.A.R.T system¹

The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI hard disks. It is derived from the smartsuite package, and includes support for ATA/ATAPI-5 disks. It should run on any modern Linux system.

... part of T2, get it here

URL: https://smartmontools.sourceforge.net/

Author: Bruce Allen <smartmontools-support [at] lists [dot] sourceforge [dot] net>
Maintainer: Rene Rebe <rene [at] t2-project [dot] org>

License: GPL
Status: Stable
Version: 7.4

Remark: Does cross compile (as setup and patched in T2).

Download: https://sourceforge.net/projects/smartmontools/files/smartmontools/7.4/ smartmontools-7.4.tar.gz

T2 source: hotfix-samsung.patch
T2 source: smartd.init
T2 source: smartmontools.cache
T2 source: smartmontools.desc

Build time (on reference hardware): 6% (relative to binutils)²

Installed size (on reference hardware): 2.55 MB, 39 files

Dependencies (build time detected): 00-dirtree bash binutils coreutils diffutils findutils gawk grep gzip linux-header m4 make patch sed tar

Installed files (on reference hardware): [show]

¹) This page was automatically generated from the T2 package source. Corrections, such as dead links, URL changes or typos need to be performed directly on that source.

²) Compatible with Linux From Scratch's "Standard Build Unit" (SBU).