prusa-slicer: G-code generator for 3D printers1
PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap community. It takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers.
... part of T2, get it here
URL: https://www.prusa3d.com/prusaslicer/
Author: Prusa Research inc
Maintainer: T2 Project <t2 [at] t2-project [dot] org>
License: AGPL3
Status: Stable
Version: 2.6.0_287e1e2
Download: https://github.com/prusa3d/PrusaSlicer/ prusa-slicer-2.6.0_287e1e2.tar.gz
T2 source: cascade-version.patch
T2 source: prusa-slicer.cache
T2 source: prusa-slicer.conf
T2 source: prusa-slicer.desc
T2 source: wxwidget-version.patch.disabled
Build time (on reference hardware): 100% (relative to binutils)2
Installed size (on reference hardware): 0.01 MB, 5 files
Dependencies (build time detected): blosc boost cereal cgal eigen jemalloc libjpeg nanosvg opencascade openvdb qhull wxwidgets
Installed files (on reference hardware): n.a.
1) This page was automatically generated from the T2 package source. Corrections, such as dead links, URL changes or typos need to be performed directly on that source.
2) Compatible with Linux From Scratch's "Standard Build Unit" (SBU).