RSS

dhcp: Dynamic Host Configuration Protocol server and relay agent1

The Internet Software Consortium DHCP Server, dhcpd, implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). DHCP allows hosts on a TCP/IP network to request and be assigned IP addresses, and also to discover information about the network to which they are attached. BOOTP provides similar functionality, with certain restrictions.

... part of T2, get it here

URL: http://www.isc.org/products/DHCP/

Author: ISC Software <bind [at] isc [dot] org>
Maintainer: Rene Rebe <rene [at] t2-project [dot] org>

License: Free-to-use
Status: Stable
Version: 4.4.3

Remark: Does cross compile (as setup and patched in T2).
Remark: Includes jailing support.

Download: http://ftp.isc.org/isc/dhcp/4.4.3/ dhcp-4.4.3.tar.gz

T2 source: dhcp.cache
T2 source: dhcp.conf
T2 source: dhcp.desc
T2 source: dhcp.init
T2 source: hotfix-bin-sh.patch
T2 source: mipsel.patch.cross
T2 source: rocknet_dhcp.sh
T2 source: verbose-log.patch

Build time (on reference hardware): 25% (relative to binutils)2

Installed size (on reference hardware): 12.85 MB, 76 files

Dependencies (build time detected): 00-dirtree bash binutils coreutils diffutils findutils gawk grep gzip linux-header m4 make patch sed tar zlib

Installed files (on reference hardware): [show]

1) This page was automatically generated from the T2 package source. Corrections, such as dead links, URL changes or typos need to be performed directly on that source.

2) Compatible with Linux From Scratch's "Standard Build Unit" (SBU).

Generated: in 0.08s — Copyright ©2004-2024 ExactCODE GmbH and others. All Rights Reserved. The T2 SDE Project is maintained
and driven by the community and sponsored by ExactCODE. This is a community maintained site. ExactCODE is not responsible for the content.