--- Log opened Wed Aug 06 00:00:44 2008 00:15 < Ragnarin> back 00:16 < felanha> me, too ;-) 00:16 < Ragnarin> did you check out trunk? 00:16 < help-needed> welcome back guys 00:16 < Ragnarin> thanks 00:16 < help-needed> I changed my nick name 00:16 < Ragnarin> yea I saw 00:17 < felanha> if the files are not there, Build/Emerge will call Download for you, you don't have to run it beforehand 00:18 < help-needed> can we start from scratch and maybe give me the commands to type into the console/terminal 00:19 < Ragnarin> the sequence is ok 00:19 < Ragnarin> which package did it stop with? 00:20 < help-needed> That was yesterday, I'll start over from the top and tell you when I snag a problem 00:20 -!- ChanServ [ChanServ@services.] has quit [shutting down] 00:20 < Ragnarin> ok 00:21 < Ragnarin> if you start Build-Target again it will only try to build packages that didn't build before 00:21 < Ragnarin> so you probably don't have to wait long 00:22 < help-needed> No I'm deleting everything and starting from scratch, It goes pretty quick before it stops 00:22 < Ragnarin> oh ok 00:22 < Ragnarin> you're building trunk? 00:22 < help-needed> extracting t2-7.0-rc2.tar.bz2 00:22 < help-needed> is that the latest 00:23 < Ragnarin> trunk is the latest :p 00:23 < felanha> 7.0-rc2 is the last stable 00:23 < help-needed> because that was built nov 2007 nothing in 2008??? 00:23 < Ragnarin> rxr: we're still at rc? o_o 00:24 < Ragnarin> I only do trunk ... that's a lot more up to date 00:24 < help-needed> is that hard to do? 00:24 < felanha> trunk = 8.0 00:24 < Ragnarin> not hard, no ... just need to have subversion installed 00:26 -!- ChanServ [ChanServ@services.] has joined #t2 00:26 -!- ServerMode/#t2 [+o ChanServ] by irc.freenode.net 00:27 < help-needed> what would I have to do to get the subversion installed, ? just remember this is 100% new to me. I do like doing new things, but it could be a bit frustrating for you guys to explain, But on puppy I did manage 1500+ forum post , basically helping people out with problems, SO If you teach me, I can Teach others :) 00:31 < Ragnarin> :) 00:36 -!- ChanServ [ChanServ@services.] has quit [shutting down] 00:36 -!- ChanServ [ChanServ@services.] has joined #t2 00:36 -!- ServerMode/#t2 [+o ChanServ] by irc.freenode.net 00:40 < help-needed> if you look at Ubuntu intrepid specs http://distrowatch.com/table.php?distribution=ubuntu would it be hard to build a T2 compatible version minus KDE&Gnome, Like a script or something? 00:41 < Ragnarin> hm? o_o why would you do that o_o 00:48 < help-needed> well a lot of users on puppy had a real problem compiling packages, and puppy 4.0 wan't compatible with anything, atleast puppy 3.0 you could use Gslapt and that worked. But if you looked at http://packages.ubuntu.com/intrepid/ You can download just about anything precompiled. It would make life so much easier for new users. Have a look. :) 01:17 < felanha> I just saw: Puppy Linux 4.00 bases on T2, again! 01:17 < felanha> 2008-05-05 01:18 < Ragnarin> ubuntu tends to mess too much with package default settings tho 01:30 -!- sparc-kly [n=mubex@adsl-72-50-103-89.prtc.net] has joined #t2 02:15 -!- emte [n=emte@d154-5-45-238.bchsia.telus.net] has joined #T2 02:21 -!- Enqlave [n=stealth@sourcemage/guru/stealth] has quit ["Dont wait to die to find paradise..."] 02:25 < help-needed> Sorry Guys, I was Gone for a bit, The Mailman came with my New Cis ink system for my printer, So I played around with that a bit:) Ink all over my hands, lol Got it going somewhat, I'll have to spend more time later on. This is more important. 02:26 < Ragnarin> lol 02:26 < Ragnarin> ok 02:30 -!- Enqlave [n=stealth@sourcemage/guru/stealth] has joined #t2 02:37 -!- emte [n=emte@d154-5-45-238.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 02:54 -!- sparc-kly [n=mubex@adsl-72-50-103-89.prtc.net] has quit ["Leaving"] 03:18 < help-needed> Hi guys should I try the default setup or should I try to do what I want to do first, The ubuntu thing? I also like slackware. But ubuntu has better packages. 03:37 < help-needed> Should I select minimalistic desktop with xorg and basic desktop? Thats what I picked last time? 03:41 < help-needed> Can we go through the steps please, I have an appointment in about 2.1/4 hours8-) Job interview, with inkstains on my hands, lol 03:53 < help-needed> INFO: Using mirror . 03:53 < help-needed> Downloading 00-dirtree:download/mirror// ... 03:53 < help-needed> 0.0%Warning: Failed to create the file download/mirror//.incomplete 03:53 < help-needed> ############ 17.3% 03:53 < help-needed> Finished downloading 1206 bytes in 1.714 seconds (703.000 bytes/sec). 03:53 < help-needed> curl: (23) Failed writing body 03:53 < help-needed> ERROR: CURL Returned Error 23. Please read the curl manpage. 03:53 < help-needed> INFO: download from mirror failed, trying original URL. 03:53 < help-needed> unrecognized! 03:53 < help-needed> Downloading mkinitrd:download/mirror// ... 03:53 < help-needed> 0.0%Warning: Failed to create the file download/mirror//.incomplete 03:53 < help-needed> ############ 17.3% 03:53 < help-needed> Finished downloading 1206 bytes in 1.113 seconds (1083.000 bytes/sec). 03:53 < help-needed> curl: (23) Failed writing body 03:53 < help-needed> ERROR: CURL Returned Error 23. Please read the curl manpage. 03:53 < help-needed> INFO: download from mirror failed, trying original URL. 03:53 < help-needed> unrecognized! 03:53 < help-needed> Downloading linux-header:download/mirror/l/linux-2.6.19.tar.bz2 ... 03:53 < help-needed> thats the start of it 03:57 < help-needed> Ragnarin: Are you around? able to lend a hand? 04:07 < help-needed> HELP I CAN'T SWIM !!!!! I'm DROWNING HERE, LOL 04:20 -!- emte [n=emte@d154-5-45-238.bchsia.telus.net] has joined #T2 04:28 -!- emte [n=emte@d154-5-45-238.bchsia.telus.net] has quit [Read error: 60 (Operation timed out)] 05:13 < Ragnarin> lol 05:14 < Ragnarin> are you on a fat filesystem? o_O 05:35 < help-needed> I'm using a puppy linux live cd with a live compiler install. :) I have 3.5 Gigs of memory left and it just finished downloading 05:35 < help-needed> this is the last file to download 05:35 < help-needed> Downloading xf86-input-fujitouch:download/mirror/x/xf86-input-fujitouch-0.6.4.tar.bz2 ... 05:35 < help-needed> ######################################################################## 100.0% 05:35 < help-needed> Finished downloading 215857 bytes in 10.029 seconds (21524.000 bytes/sec). 05:35 < help-needed> cksum-test (bzip2): download/mirror/x/xf86-input-fujitouch-0.6.4.tar.bz2 05:35 < help-needed> # 05:36 < Ragnarin> ok o_O 05:36 < Ragnarin> I doubt you'll be able to finish a build in a ram disk :P 05:36 < Ragnarin> and you WILL have to have a unix-style filesystem for it 05:38 < help-needed> I'll do this check ./scripts/Download -list-missing 05:38 < Ragnarin> as felanha already said, you don't have to do a complete Download to start building 05:38 < Ragnarin> Build-Target will try to dl what it needs 05:39 < help-needed> oh okay because there was about 200 listings when I did that check 05:40 < help-needed> did you want me to post it? 05:40 < help-needed> probably just get kicked for flooding 05:40 < help-needed> lol 05:40 < Ragnarin> rather not ;P 05:41 < Ragnarin> again, you really need to have unix style filesys under you to do a build 05:42 < help-needed> I came this far, might as well see what happens :) 05:42 < help-needed> its starting to build, 05:43 < help-needed> Have to go to my interview anyways. Should be back inabout 2hrs 05:43 < help-needed> will you be around? 05:43 < help-needed> thanks for everything 05:43 < help-needed> :) 05:43 < Ragnarin> maybe 05:43 < Ragnarin> and you're welcome :) 08:24 -!- emte [n=emte@d154-5-45-238.bchsia.telus.net] has joined #T2 08:46 -!- hwinkel [n=hwinkel@port-87-193-170-219.static.qsc.de] has joined #t2 09:05 -!- emte [n=emte@d154-5-45-238.bchsia.telus.net] has quit [Read error: 110 (Connection timed out)] 09:06 < mtr> moin 09:09 < CIA-4> mtr * r29907 /trunk/package/perl/perl/ (install.patch.cross perl.conf perl.desc): 09:09 < CIA-4> * fixed perl to cross build again, enabled at stage 1 and tagged as CROSS 09:09 < CIA-4> * substituted $(CC) with $(HOSTCC) to compile native build helper 09:12 < rxr> re 09:12 < rxr> mtr: it does not need to be stage 1, only stuff needed for bootstrapping should be cross build by defaul 09:12 < rxr> t 09:14 < rxr> though thanks for taking a look on this beast :-) 09:16 < mtr> hi rxr 09:17 < mtr> oh yes, the CROSS tag should be sufficient 09:17 < rxr> yep :-) 09:20 < mtr> but I am still not satisfied with the cross build result: a cross-built target is still not usable to do T2 builds :( 09:21 < rxr> no? what's missing? 09:21 < mtr> because perl segfaults in autoconf (or m4?, dont remember exactly) build 09:22 < mtr> at least this is true for x86 -> x86_64 cross build 09:23 < mtr> last time I tried with a branch-7.0 build, some weeks ago 09:24 < mtr> and this is an issue I would really like to be solved before 7.0 final (but had too less time the last weeks ...) 09:26 < mtr> and maybe we should think about upgrading linux26 in 7.0-stable to a reasonable new version 09:26 < mtr> I guess noone understands why a 7.0 release would come with a fairly old 2.6.21 kernel 09:26 < rxr> well - 7.0 is a bit problematic, as I consider it mostly done, we only never released it because we have tons of infrastructure (mirroring etc.) problems to solve 09:27 < rxr> and btw. all 2.6.2x kernels have major regressions 09:27 < rxr> so many that many of our clients still run 2.6.1x ... 09:27 < rxr> the latest 2.6.23 or .24 x86 setup rewrite from assembler to C introduced even more 09:27 < mtr> ok, so its more an issue for desktop/portable usage 09:28 < rxr> so badly that on some boards even the X.org intel driver does not work anymore and stalls the GPU as the linux setup apparetnly messes up something in the BIOS ... 09:28 < mtr> uhm, does not sound that good 09:28 < mtr> but on my systems 2.6.25 runs quite fine 09:29 < rxr> historically we also did not update the stable series kernels ... 09:29 < rxr> but - well, if it's a major point for you, merge updates ... 09:30 < rxr> mtr: on most of our desktop boxes newer kernels also work to some degree (modulo third party drivers that usually have problems) 09:30 < rxr> but the worst thing happens on my G5, since 2.6.24 or so it does not power off anymore 09:30 < rxr> due to broken CPU hotplug to take down CPUs during shutdown ... 09:30 < rxr> (PPC64) 09:31 < rxr> so after 30s the fans go into 100% spin emergency mode when the SMC is not read by the linux kernel for some time ... 09:31 < rxr> for me the 2.6 development is a whole big joke 09:33 < mtr> its not a really a cooling feature to run the fans at full speed instead of power-down ;) 09:33 < rxr> heh, the 4 fans at full speed make quite some noise, even louder than a hair dryer ... 09:36 < mtr> yes, I can imagine, so always put on some ear protection, it may be required by the "Berufsgenossenschaft" ... :) 09:36 < help-needed> Ragnarin: Are you still around , back from the interview :) 09:36 < help-needed> this was the result for building T2 live 09:36 < help-needed> 23:46:28 =[0]=> Building base/00-dirtree [0000 7.0-rc2]. 09:36 < help-needed> -> Reading package config: package/base/00-dirtree/00-dirtree.conf 09:36 < help-needed> -> Preparing build in src.00-dirtree.default.20080910.234627.1024.puppypc 09:36 < help-needed> -> Building. Writing output to $root/var/adm/logs/0-00-dirtree.out 09:36 < help-needed> *> The use of custmain is deprecated, please use hooks instead. 09:36 < help-needed> -> $root/var/adm/logs/0-00-dirtree.out -> 0-00-dirtree.log 09:36 < help-needed> == 09/10/08 23:46:34 =[0]=> Finished building package 00-dirtree. 09:36 < help-needed> == 23:46:35 =[0]=> Building base/linux-header [2.6.19.1 7.0-rc2]. 09:36 < help-needed> -> Reading build/.../tools.cross/lib/pkg_linux-header_pre.conf 09:36 < help-needed> -> Including SquashFS (3.2) patch ... 09:36 < help-needed> -> Reading package config: package/base/linux-header/linux-header.conf 09:37 < help-needed> -> Preparing build in src.linux-header.default.20080910.234634.5142.puppypc 09:37 < help-needed> -> Building. Writing output to $root/var/adm/logs/0-linux-header.out 09:37 < help-needed> *> The use of custmain is deprecated, please use hooks instead. 09:42 < help-needed> does That mean it worked??? 09:42 < CIA-4> mtr * r29908 /branches/7.0/package/perl/perl/ (install.patch.cross perl.conf): 09:42 < CIA-4> * merged 29907 from trunk: 09:42 < CIA-4> - fixed perl to cross build again 09:42 < CIA-4> - substituted $(CC) with $(HOSTCC) to compile native build helper 09:42 < CIA-4> * default is disabled at cross-stage 1 09:45 < rxr> help-needed: your 00-dirtree built 09:45 < rxr> help-needed: the linux-header did not yet end from what I saw in the outupt 09:52 < CIA-4> rene * r29909 /trunk/package/security/libprelude/libprelude.desc: * updated libprelude (0.9.18 -> 0.9.19) 09:52 < CIA-4> rene * r29910 /trunk/package/kde/ktorrent/ktorrent.desc: * updated ktorrent (3.1.1 -> 3.1.2) 10:07 < help-needed> thanks rxr I'm compiling live, do you think the linux head would be built if I actually installed a linux distro? 10:07 < help-needed> linux header 10:07 < rxr> what do you mean with "installed a linux distro", what are you building t2 on ? 10:09 < help-needed> Well I've been a long user of puppy linux, They have a live cd, basically I built a live gcc compiler to match the live cd, that way I never have an operating system installed, I just have 1.5 terabytes of hard drive space that I use strictly for storage, plus 16 gigs of swap, and 4 gigs of ddr2 800. 10:10 < help-needed> I run 100 % in memory 10:11 < help-needed> I even built my variants at www.ttuuxxx.com in 100% memory 10:13 < rxr> aha 10:14 < rxr> well- just running in memory does not pose a problem for building software 10:14 < rxr> maybe post the actual error log so we see what the error i 10:14 < rxr> s 10:17 < help-needed> this was the download errors 10:17 < help-needed> 23 download/mirror// http://dl.t2-project.org/mirror/7.0// 10:17 < help-needed> 23 download/mirror// http://dl.t2-project.org/mirror/7.0// 10:17 < help-needed> 22 download/mirror/p/perl-5.8.8.tar.bz2 http://dl.t2-project.org/mirror/7.0/p/perl-5.8.8.tar.bz2 10:17 < help-needed> 22 download/mirror/u/udev-113.tar.bz2 http://dl.t2-project.org/mirror/7.0/u/udev-113.tar.bz2 10:17 < help-needed> 22 download/mirror/g/gcc-4.2.2.tar.bz2 http://dl.t2-project.org/mirror/7.0/g/gcc-4.2.2.tar.bz2 10:17 < help-needed> 22 download/mirror/m/m4-1.4.10.tar.bz2 http://dl.t2-project.org/mirror/7.0/m/m4-1.4.10.tar.bz2 10:17 < help-needed> 22 download/mirror/b/bzip2-1.0.4.tar.bz2 http://dl.t2-project.org/mirror/7.0/b/bzip2-1.0.4.tar.bz2 10:17 < help-needed> 22 download/mirror/p/pcre-7.4.tar.bz2 http://dl.t2-project.org/mirror/7.0/p/pcre-7.4.tar.bz2 10:17 < help-needed> 22 download/mirror/l/libxml2-2.6.29.tar.bz2 http://dl.t2-project.org/mirror/7.0/l/libxml2-2.6.29.tar.bz2 10:17 < help-needed> 22 download/mirror/g/gnupg-1.4.7.tar.bz2 http://dl.t2-project.org/mirror/7.0/g/gnupg-1.4.7.tar.bz2 10:17 < help-needed> 22 download/mirror/g/gnupg-1.4.7.tar.gz http://ftp.gnupg.org/gcrypt/gnupg/gnupg-1.4.7.tar.gz 10:17 < help-needed> 22 download/mirror/r/rsync-2.6.9.tar.bz2 http://dl.t2-project.org/mirror/7.0/r/rsync-2.6.9.tar.bz2 10:17 < help-needed> 22 download/mirror/r/rsync-2.6.9.tar.gz http://rsync.samba.org/ftp/rsync/rsync-2.6.9.tar.gz 10:17 < help-needed> 22 download/mirror/c/cups-1.2.12-source.tar.bz2 http://dl.t2-project.org/mirror/7.0/c/cups-1.2.12-source.tar.bz2 10:17 < help-needed> 22 download/mirror/c/cairo-1.4.10.tar.bz2 http://dl.t2-project.org/mirror/7.0/c/cairo-1.4.10.tar.bz2 10:17 < help-needed> 22 download/mirror/s/samba-3.0.26a.tar.bz2 http://dl.t2-project.org/mirror/7.0/s/samba-3.0.26a.tar.bz2 10:17 < help-needed> 22 download/mirror/f/firefox-2.0.0.9-source.tar.bz2 http://dl.t2-project.org/mirror/7.0/f/firefox-2.0.0.9-source.tar.bz2 10:17 < help-needed> 22 download/mirror/f/firefox-2.0.0.9-source.tar.bz2 http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.9/source/firefox-2.0.0.9-source.tar.bz2 10:17 < help-needed> 22 download/mirror/e/e2fsprogs-1.40.2.tar.bz2 http://dl.t2-project.org/mirror/7.0/e/e2fsprogs-1.40.2.tar.bz2 10:17 < help-needed> 22 download/mirror/m/mplayer-2007-04-25.tar.bz2 http://dl.t2-project.org/mirror/7.0/m/mplayer-2007-04-25.tar.bz2 10:17 < help-needed> 22 download/mirror/n/nfs-utils-1.0.12.tar.bz2 http://dl.t2-project.org/mirror/7.0/n/nfs-utils-1.0.12.tar.bz2 10:17 < help-needed> 22 download/mirror/o/openssh-4.7p1.tar.bz2 http://dl.t2-project.org/mirror/7.0/o/openssh-4.7p1.tar.bz2 10:17 < help-needed> 22 download/mirror/w/wpa_supplicant-0.6.0.tar.bz2 http://dl.t2-project.org/mirror/7.0/w/wpa_supplicant-0.6.0.tar.bz2 10:18 < help-needed> Its a shame that this stuff isn't updated, like firefox 2.009 now its like 2.0.1.7 etc 10:21 < help-needed> The other guy said it was qt4 but when I checked it, its qt-x11-free-3.3.8.tar.bz2 <---- which is QT3 10:26 < help-needed> rxr is that what you wanted? 10:45 < rxr> not really 10:45 < rxr> also the pastes in IRC are not too readable 10:45 < rxr> please use some web paste service the next time 10:45 < rxr> I wanted to know at which point your Build-Target abords, and the error log of that particular package 10:46 < rxr> if it's linux-header then build/.../var/adm/logs/?-linux-header.err 10:46 -!- Topic for #t2: T2 SDE | 7.0-rc released! | trunk heading for 8.0 | The T2 Open System Development Environment (SDE) | http://www.t2-project.org/startpage/ | http://bugs.t2-project.org 10:46 -!- Topic set by H4X [] [Tue Jun 26 17:57:25 2007] 10:59 < help-needed> I'll look, sorry about the delay bit of a mad house with kids,lol there be in bed soon :) 11:10 < help-needed> brb I have to ReStart X the bash script it hung 11:10 -!- help-needed [n=PupUserd@123-243-198-100.static.tpgi.com.au] has quit [Remote closed the connection] 11:12 -!- Need-Help [n=PupUserd@123-243-198-100.static.tpgi.com.au] has joined #t2 11:14 < Need-Help> when I open Src/linuxhead it crashes, basically an endless loop of searching for files 11:15 < Need-Help> Does anyone know of a good small linux distro -700MB that can compile T2? I'll download it and install it 11:17 < Need-Help> also can I reuse the downloaded files? 11:17 < Need-Help> would save a lot of time if I save them to hard drive 11:22 < rxr> a t2 minimal build is only 2xx MB installable ISO 11:23 < rxr> so maybe about 700 MB installed ... 11:23 < Need-Help> what do you guys use to as an OS to compile, I've always used puppy ???? 11:28 < rxr> well - most of us probably just use vanilla t2 to build t2. 11:29 < rxr> however many cooperations also use SuSE, Fedora, Debian flavors to compile their T2 embedded solutions ... 11:29 < Need-Help> rxr I was talking to Ragnarin about my plans earlier, I guess I can explain them again :) Basically I wanted to learn how to build T2 and then I wanted to learn how to change packages, So I can make a compatible lite linux with Ubuntu intrepid so that I could use the precompiled packages from there database wich is really large but I would have to change the Glibc, and Qt3 to Qt4 etc, and remove KDE, Gnome to remove size, 11:30 < Need-Help> does vanilla have a gui? ex desktop manager? 11:30 < rxr> t2 is not a fixed thing 11:30 < rxr> the minial ISOs do not include a GUI 11:30 < rxr> the bigger ones, like deskktop or minimal-xorg include UI stuff ... 11:38 < Need-Help> I was building the minimal-xorg-desktop 11:38 < Need-Help> finally kids going to bed, brb in 10 mins have to read a book :) 12:25 < Need-Help> Ok Now Finally the house is settle, (Hopes the wife doesn't start up now,LOL) Basically I need some sort of linux with a built in compiler i can use with a GUI to install to the hard drive first, preferly something small, since it isn't going to stay long, Just long enough to compile T2, So any ideas? 12:29 < Need-Help> Xubuntu is 571M does it come with gcc? 12:37 -!- Need-Help [n=PupUserd@123-243-198-100.static.tpgi.com.au] has quit [Remote closed the connection] 12:55 < CIA-4> aldas * r29911 /trunk/package/develop/subversion/ (sasl2-fix.patch subversion.desc): * updated subversion (1.5.0 -> 1.5.1) 17:53 -!- mqueiros_ [n=mqueiros@217.70.75.228] has joined #t2 18:52 -!- DuckFault [n=DuckFaul@rrcs-71-43-244-114.se.biz.rr.com] has quit [Read error: 110 (Connection timed out)] 19:11 -!- hwinkel [n=hwinkel@port-87-193-170-219.static.qsc.de] has left #t2 [] 19:24 < CIA-4> rene * r29912 /trunk/target/share/initrd/rootfs/init: 19:24 < CIA-4> * synced initrd/init for initrd/initramfs image output with the 19:24 < CIA-4> other T2 early user-space init's 19:25 < Ragnarin> hey rxr :) 19:25 < rxr> hi Ragnarin 19:39 -!- Dallur [n=earl@fgfw.basis.is] has quit [Read error: 104 (Connection reset by peer)] 20:04 < CIA-4> rene * r29913 /trunk/package/base/gcc/gcc.cache: 20:04 < CIA-4> * updated gcc.cache from latest reference build (to include mpfr, 20:04 < CIA-4> zlibl, pkgconfig dependencies and libjava related x stuff) 20:09 < rxr> http://www.macrumors.com/iphone/2008/08/05/are-you-rich-buy-this-999-99-iphone-app/ 20:21 -!- Ragnarin [i=loki@planeshift/developer/Ragnarin] has quit ["reboot"] 20:24 -!- felanha [i=volker@D8FA4DE6.ptr.dia.nextlink.net] has quit [Read error: 104 (Connection reset by peer)] 20:26 -!- Ragnarin [n=loki@D8FA4DE6.ptr.dia.nextlink.net] has joined #t2 20:28 -!- felanha [n=dragonet@66-146-166-62.skyriver.net] has joined #t2 20:52 -!- DuckFault [n=DuckFaul@rrcs-71-43-244-114.se.biz.rr.com] has joined #t2 22:52 -!- Enqlave is now known as vss 23:10 -!- hwinkel [n=hwinkel@p54B6BC28.dip0.t-ipconnect.de] has joined #t2 23:12 -!- mqueiros_ [n=mqueiros@217.70.75.228] has quit [Client Quit] 23:42 -!- vss [n=stealth@unaffiliated/vss] has quit ["Dont wait to die to find paradise..."] --- Log closed Thu Aug 07 00:00:50 2008