--- Log opened Tue May 17 00:00:08 2005 --- Day changed Tue May 17 2005 00:00 < valentin> hi don mnemoc 00:02 < mnemoc> :) 00:05 < rxr> valentin: what kind of speed? serial baud ? 00:05 < rxr> hi mnemoc 00:06 < mnemoc> hi rxr 00:07 < valentin> yep, the thingy you put behind the ppp /dev/tts/... option 00:08 < rxr> numeric value labeled baud for now I would say 00:09 < valentin> numeric value is ? 00:09 < valentin> textfield ? 00:10 < rxr> interger value I menat ... 00:10 < rxr> or textfield if that is way easier ... 00:10 < valentin> what is integer value ? 00:10 < valentin> a spin box ? 00:12 < rxr> hey - cool 00:12 < rxr> maybe this is what my serial mouse negotates via Serial PnP: 00:12 < rxr> $ ./a.out 00:12 < rxr> 205 cd 00:12 < rxr> 179 b3 00:12 < rxr> 68 44 00:12 < rxr> 32 20 00:12 < rxr> 138 8a 00:12 < rxr> 117 75 00:12 < rxr> 165 a5 00:12 < rxr> 152 98 00:12 < rxr> 72 48 00:12 < rxr> 164 a4 00:12 < rxr> 82 52 00:12 < rxr> 252 fc 00:12 < rxr> Resetting port ... 00:13 < rxr> hm - no - this does not sem to be what it should send ... 00:16 < valentin> rxr: what happens when ommiting the speed ? 00:17 < rxr> valentin: I think pppd will complain that no speed is given 00:17 < rxr> cool ! Here we go: 00:17 < rxr> $ ./a.out 00:17 < rxr> 77 4d 00:17 < rxr> 51 33 00:17 < rxr> 8 8 00:17 < rxr> 1 1 00:17 < rxr> 36 24 00:17 < rxr> 44 2c 00:17 < rxr> 39 27 00:17 < rxr> 41 29 00:17 < rxr> 24 18 00:17 < rxr> 16 10 00:17 < rxr> 16 10 00:17 < rxr> 9 9 00:17 < rxr> Resetting port ... 00:17 < rxr> that should i tbe 00:17 < rxr> it be ... 00:17 < rxr> 8 is the start mark - 9 the end! 00:18 < rxr> and 77 is a stray 'M' due to stupid Mouse ... 00:18 < rxr> cool - that matches all the specs ... 00:19 < rxr> hm - my good old ELSA modem sends strage stuff ... 00:19 * valentin once again raging because of those damn *nix components from the dark ages of computer technology 00:19 < rxr> ah - no - that decodes as well ! 00:20 < rxr> I do not paste it here - it sends 44 bytes ... ,-) 00:24 < valentin> haha 00:24 < valentin> is there a way to set baud rate to some value that always works ? 00:24 < rxr> ? 00:25 < valentin> i cannot tell the magazine readers they should "enter a valid baut rate" 00:25 < rxr> I think for anything since 1992 or so should work at 115200 BAUD ... 00:32 < rxr> coo - prettified and made ready to compile with g++ 00:32 < rxr> God PnP fields - 43 bytes: 00:32 < rxr> ^- ELSA modem 00:33 < rxr> God PnP fields - 10 bytes: 00:33 < rxr> ^- Logitech serial mous 00:33 < rxr> e 00:40 < valentin> rxr: nice work 00:41 < rxr> PnP ID string: `(!DLGI800)' 00:41 < rxr> PnP rev 1.00 00:45 < rxr> PnP ID string: `(#ELS8318\00748728\MODEM\\MicroLink 56k00)' 00:45 < rxr> PnP rev 0.99 00:46 < rxr> cool thing this starts to get 00:46 < rxr> T2 - the first distribution detecting serial devices automatically ? 00:46 < rxr> and this just because we start to get a perfect product out of it ? 00:47 < valentin> rxr: wow 00:48 < rxr> I could also hook on a good olde A3 CAD tabled ... and see if it yields an PnP ID .... 00:48 < rxr> I wonder why noone did this in 1997 when this devices have been recent ... 00:48 < rxr> with just working devices in 1997 linux would already be somewhere else ... 00:49 < valentin> it could be somewhere else today 00:49 < rxr> at least we get our long demanded perfect OS in 2005 it seems ... 00:54 < valentin> btw: how should i refer to the Network config in the article ? the t2 network configuration or just the config tool for the magazine cd 00:54 < rxr> I think T2, or? 00:56 -!- c4y0 [~cmora@adsl200-75-92-166.epm.net.co] has quit ["[BX] Leggo my Eggo!"] 01:08 < rxr> which ones this time ? 01:08 < rxr> oh - sorry 01:18 < rxr> I wonder if I loose a byte ... 01:19 < rxr> I should get 7 bytes I think for manufactur and product - I only get 6 for the logitech mice 01:24 < rxr> valentin: is your athlon up and running ? 01:24 < valentin> rxr: no 01:24 < rxr> ok 01:24 < valentin> i can boot it however 01:25 < rxr> not that urgent 01:25 < rxr> how is it going on your side ? 01:27 < valentin> the config dialogs are kind of complete, basically i miss the switching and activating part i wanted to have in the applet 01:27 < valentin> but kde applets are ugly to code 01:27 < valentin> maybe i decide to put the required widgets into the main config window or so 01:28 < valentin> ... for this product ... 01:28 < valentin> well, that would be a good idea for now 01:28 < rxr> and - how is article ? 01:28 < valentin> which article ? ,) 01:28 < rxr> .oO? 01:28 < valentin> far from beeing finished 01:29 < valentin> but the text part should be finished quite fast after i took some screenshots 01:30 < valentin> i habe some ugly crashes to debug, but i think i leave that out for now 01:30 < rxr> of course 01:30 < rxr> I would just focus to get the vapoware article out ... 01:49 < rxr> $ ./a.out | grep -a CLASS 01:49 < rxr> CLASS: MOUSE -ms3 01:50 < rxr> $ ./a.out | grep -a CLASS 01:50 < rxr> CLASS: MODEM 01:50 < rxr> ok - I consider this semi final ,-) 02:00 < rxr> valentin: could you test ~rene/develop/a.out /dev/tts/0 on your athlon ? 02:00 < rxr> binary from my athlon 02:00 < rxr> but only if it is not too time consuming ... 02:01 < valentin> damn, two cosmetic problems remaining 02:01 < valentin> s/two/two major 02:01 < rxr> hm 02:02 < rxr> then don't waste time on my serial thing .. 02:03 < valentin> rxr: i test it - just a moment 02:04 < rxr> ok 02:04 < rxr> thanks 02:08 < valentin> haudraufinix suffix was ? 02:09 < rxr> .45 02:11 < valentin> rxr, can you create a static version of a.out ? 02:12 < valentin> or gimme the source :) 02:12 < rxr> serpnp.c in the same dir of course ... 02:12 < rxr> if you rm it accidently I slap you! 02:14 < valentin> root@mooo:~# ./a.out /dev/tts/0 02:14 < valentin> God PnP fields - 11 bytes: 02:14 < valentin> 8 8 02:14 < valentin> 1 1 02:14 < valentin> 36 24 02:14 < valentin> 44 2c 02:14 < valentin> 39 27 02:14 < valentin> 41 29 02:14 < valentin> 24 18 02:14 < valentin> 16 10 02:14 < valentin> 16 10 02:14 < valentin> 17 11 02:14 < valentin> 9 9 02:15 < valentin> LGI8001 02:15 < valentin> Segmentation fault (core dumped) 02:15 < rxr> why the hell does it segfault ... 02:15 < rxr> ok - what was your box's prefix so I can debug ? 02:15 < valentin> #0 0x40165afe in strcmp () from /lib/libc.so.6 02:15 < valentin> #1 0x08048d9a in main (argc=2, argv=0xbffff8d4) at serpnp.c:350 02:16 < rxr> oh 02:16 < valentin> it segfaults because you use hell's own language to work on strings ,) 02:16 < rxr> yes 02:16 < valentin> s/on/with 02:16 < rxr> converting it to embedded C++ was left for a rainy sunday task 02:17 < rxr> I fact I forgot to check for NULL termiation of the static list 02:17 < valentin> bool operator == (const std::string&, const std::string&) ^^ 02:17 < rxr> try making the line: 02:17 < rxr> while (it-name != 0 && strcmp(it->name, id.eisaid) != 0) 02:19 < rxr> hm - in fact your device is in the list ... 02:19 < rxr> damn 02:19 < valentin> works 02:19 < rxr> output ? 02:19 < rxr> last lines only ... 02:19 < valentin> God PnP fields - 11 bytes: 02:19 < valentin> 8 8 02:19 < valentin> 1 1 02:19 < valentin> 36 24 02:19 < valentin> 44 2c 02:19 < valentin> 39 27 02:19 < valentin> 41 29 02:19 < valentin> 24 18 02:19 < valentin> 16 10 02:19 < valentin> 16 10 02:19 < valentin> 17 11 02:19 < valentin> 9 9 02:19 < valentin> LGI8001 02:19 < valentin> Resetting port ... 02:19 < valentin> too late ... 02:20 < rxr> interesting that you own another serial mice than I ... 02:20 < rxr> altough the look so simillar ... 02:21 < rxr> sorry to bother you - but could you test the line with: 02:21 < rxr> while (it-name != 0 && strncmp(it->name, id.eisaid, id.neisaid) != 0) 02:21 < rxr> it should output s.th. like this at the end: 02:21 < rxr> CLASS: MOUSE -mman 02:22 < valentin> CLASS: MOUSE -mman 02:22 < valentin> yeah 02:22 < rxr> thanks 02:22 < rxr> although I do not know if -mman is correct 02:22 < rxr> it is what the X driver had an equivalent in it ... 02:22 < rxr> mine works with -ms ... 02:22 < valentin> mine too .oO 02:23 < rxr> but mine is different anyway - let's test with the next rev of the live cd ... 02:23 < rxr> or should I make it -ms before? 02:23 < valentin> are there serial mices which are not ms ? 02:23 < rxr> yes 02:23 < rxr> all those manufactors created quite some chaos around this trivial mice fluff ... 02:23 < rxr> I mark it -ms ... 02:23 < rxr> in the hope it works for you ... 02:23 < valentin> it should 02:24 < valentin> what about "auto" ? 02:24 < rxr> AFAICS the kernel has no auto for serio ... 02:24 < rxr> valentin: I want to bind the serial port to the kernel serio stuff - so it comes out of /dev/input/mice 02:24 < valentin> :( 02:24 < rxr> I do nto want to alter the xorg.conf for serial mices 02:24 < valentin> yes, i know 02:24 < rxr> this seems to be so elegant ... ,-) 02:26 < valentin> it is the only sane way to do this, otherwise usb mice that are plugged in later will not work because of some old serial mouse attached 02:26 < rxr> yes - hower X can be configured for multple devices 02:26 < rxr> so we could configure /dev/input/mice and /dev/tts/0 to send core events ... 02:26 < rxr> howver I like the new 2.6 input subsytem 02:26 < rxr> aside that it does not bind serial mices automatically ... :-(( 02:29 < valentin> http://exactcode.de/valentin/snapshot2.png 02:29 < valentin> the top section of the window is quite messed up 02:31 < rxr> nice 02:32 < rxr> btw. a bit OT, I tried to ACPI sleep my athlon from within the live-cd 02:32 < rxr> it mostly fall asleep and mostly woke up 02:32 < rxr> never ever was ACPI suspend working that far ... 02:32 < valentin> i've mostly fallen asleep, too 02:33 < rxr> however the box is full of expotic hardware, like the Delta 1010 and the DVB card - guess some are still messed a bit up ... 02:33 < rxr> valentin: yeah - don't ask ... 02:33 * _Lewellyn hands you both some coffee 02:33 < rxr> but I soon crawl into bed ... 02:33 < valentin> _Lewellyn: thanks 02:33 < rxr> hi _Lewellyn 02:33 < _Lewellyn> rxr: sounds like things are going well on the t2 front :) 02:33 < rxr> _Lewellyn: yes, definetly ,-) 02:34 < valentin> if i only find out why those ugly QLayout object do not behave the way i tell them ... 02:34 < _Lewellyn> is there going to be a supported upgrade path from rock upon release? 02:34 < rxr> when we have time to implement PnP serial detection of mices and modems we definetly have too much time *g* 02:34 < valentin> oh - the "manual setup" is not translated ... 02:34 < _Lewellyn> eh. windows does serial pnp. so why shouldn't you? 02:35 < rxr> _Lewellyn: for T2 2.1 you can build on ROCK and build into your ROCK system and such 02:35 < rxr> despite all the cleanups and fixes the basics are compatible - for 2.2 the upgrade path is a bit more stony, since 2.2 will use u/dev by default and "maybe" drop devfs support from the core scripts 02:36 < rxr> for this you need the new mkinitrd as well as some statically linked binaries embedded into the initramfs on your system - thus the upgrade is not that "instant" 02:39 < rxr> _Lewellyn: someone I remeber your nickname - but fail to associate it right now - can you give me a tip ? 02:42 < valentin> http://exactcode.de/valentin/snapshot2.png 02:42 < valentin> bit better now 02:43 < _Lewellyn> rxr: i've popped in and out checking on rock's status for a few years. been watching t2's progression lately :) 02:44 < _Lewellyn> also, personally, i like devfs :) 02:51 < rxr> ic 02:52 < rxr> _Lewellyn: I also liked devfs over the last yeary - but there is nearly nothing to loose and much to gain with u/dev 02:52 < rxr> I was very skeptic about u/dev in the beginning - but I enjoy it more and more each day 02:53 < rxr> _Lewellyn: what type of OS do you demand more? Easy and graphical or classic Unix ? 02:54 < _Lewellyn> if i didn't have to use vmware or a gui browser, i'd not run x. 02:54 < _Lewellyn> that a sufficient answer? :) 02:54 < rxr> hehe - yes 02:54 < _Lewellyn> and what is u/dev? i've not heard much about it. 02:56 < rxr> maybe without the newly introduced slash? that is udev? 02:56 < rxr> it is a user-space /dev population based on the Linux 2.6 kobject and it's hotplug mechanism 02:56 < _Lewellyn> hm. url? 02:57 < rxr> well - the bad thing is there is no real homepage ... 02:57 < rxr> the author seems ot be a good olde unix freak who thinks html is waste of time .. 02:57 < _Lewellyn> any docs in the kernel source? 02:57 < rxr> http://ftp.kernel.org/pub/linux/utils/kernel/hotplug/ 02:58 < rxr> http://ftp.kernel.org/pub/linux/utils/kernel/hotplug/udev.html 02:58 < rxr> ^- oh - that file is new ,-)! 02:58 < valentin> rxr: where will we hide the network tool in the kde menu ? 02:59 < rxr> no idea 02:59 < rxr> system network ? 02:59 < rxr> let's only place it on the desktop for now 03:00 < rxr> valentin: my mouse serpnp code works 03:00 < rxr> detected my modem and the mouse on startup ... ! 03:00 < _Lewellyn> hm. udev does not do one of the cool things that devfs does 03:00 < rxr> mouse is working ... 03:00 < rxr> events comming out of /dev/input/mice ... 03:00 < _Lewellyn> and it's in the faq as a "this is not a udev function" sort of thing :( 03:00 < rxr> which cool thing is it you miss in u/dev ? 03:01 < rxr> the only think you can miss is module load on access 03:01 < _Lewellyn> yup 03:02 < _Lewellyn> that way i don't have extraneous crap loaded into the kernel 03:02 < _Lewellyn> if it's loaded, it's because i either compiled it in so it's always available, or i specifically needed that device 03:02 < rxr> but that is the only thing - and not really required - hardware detection is done with hotplug these days on deviec discovery and the other modules can be loaded on-demand without devfs 03:02 < _Lewellyn> i don't want the modules loaded on detection, i want them loaded when they're needed. 03:03 < rxr> ic - I'll put you in my reminder for T2 2.2 and up devfs maintainer ... 03:03 < rxr> _Lewellyn: devfs will go out of the kernel as first thing in 2.7, did you know that ? 03:04 < _Lewellyn> eh. at this rate, 2.7 is vaporware. 03:05 < rxr> yeah ... 03:05 < rxr> 2.6.667 sooner or later *g* 03:06 < _Lewellyn> if it hits 2.6.66, i'll probably stick with that for a while ;) 03:07 < valentin> rxr: i think i'll go to bed now and stand up more or less early to finish the text part of the article 03:08 < valentin> do you still need the athlon ? 03:08 < rxr> valentin: as you think is reasonable - I do not know when they need it ... 03:08 < rxr> yours? nope 03:08 < valentin> rxr: i do not know, too 03:09 < valentin> but i do not think they need it now 03:10 < _Lewellyn> which magazine is this for? 03:11 < valentin> its called Linux Intern 03:11 < valentin> a german mag 03:12 < _Lewellyn> cool 03:14 * valentin -> bed () 03:14 < valentin> cu in a few hours 03:16 < rxr> _Lewellyn: this is also why we hack on the Live CD like crazzy ... 03:18 < _Lewellyn> sleep well, valentin 03:18 < _Lewellyn> rxr: i gathered :) 03:18 < _Lewellyn> will the livecd be available for public download, too? 03:19 < _Lewellyn> even if only a couple months after it hits the store shelves? 03:19 < rxr> _Lewellyn: of course - and as normal T2 target 03:19 < rxr> http://www.t2-project.org/live 03:19 < rxr> http://gsmp.tfh-berlin.de/ftp/t2/unstable/ 03:19 < rxr> maybe I should relocate it from unstable to stable quite soon 03:27 -!- keinek_ is now known as keinek 03:31 * sparc-kly|U5 brrbrbrrbr 03:32 < sparc-kly|U5> 21:13:08 up 8 days, 1:25, 1 user, load average: 0.07, 0.09, 0.02 03:32 < sparc-kly|U5> :D 03:33 < _Lewellyn> you don't get much use out of your system! ;) 03:36 < sparc-kly|U5> you don't get much use out of your system! ;) 03:36 < sparc-kly|U5> lol 03:36 < _Lewellyn> i haven't been taxing mine very hard today, but still... ;) 03:36 < _Lewellyn> 18:36:32 up 2 days, 23:53, 13 users, load average: 1.30, 1.08, 1.01 03:37 < sparc-kly|U5> in my house : 18:37:43 up 3:04, 5 users, load average: 0.01, 0.06, 0.03 03:39 < sparc-kly|U5> anyone have New desktop target for public Download ? 03:52 -!- keinek_ [~Keinek@201.254.9.134] has joined #t2 03:54 -!- keinek [~Keinek@201.254.11.227] has quit [Read error: 110 (Connection timed out)] 04:32 -!- ojh [~omer@67-42-181-124.eugn.qwest.net] has joined #t2 05:06 < tilix> got it 05:06 -!- tilix [~root@pppoe9.bol.bg] has left #t2 [] 05:23 -!- ojh [~omer@67-42-181-124.eugn.qwest.net] has left #t2 [] 07:13 -!- keinek__ [~Keinek@201.254.13.56] has joined #t2 07:21 -!- keinek_ [~Keinek@201.254.9.134] has quit [Read error: 60 (Operation timed out)] 07:22 -!- keinek_ [~Keinek@201.254.14.196] has joined #t2 07:30 -!- keinek__ [~Keinek@201.254.13.56] has quit [Read error: 145 (Connection timed out)] 07:48 -!- keinek_ [~Keinek@201.254.14.196] has quit [Read error: 110 (Connection timed out)] 08:40 -!- keinek [~Keinek@201.254.14.59] has joined #t2 08:41 < keinek> hola 08:41 < keinek> hi 08:41 < keinek> i need help 08:41 < keinek> i forguet how configure PPPOE in T2 08:41 < keinek> anybody there? 08:42 < keinek> i need the lines for the conf. 08:42 < keinek> interface ppp0 08:42 < keinek> ppp eth0 debug 08:42 < keinek> pppoe 08:42 < keinek> ppp_option defaultroute 08:42 < keinek> ppp_option user "xxx@yyy" 08:42 < keinek> or something like that 08:42 < keinek> but dont work 08:43 < keinek> i dont have the line where pass. 08:43 < keinek> anybody can help my? 08:48 -!- keinek_ [~Keinek@201.254.14.57] has joined #t2 08:48 < keinek_> hi 08:48 < keinek_> anybody there? 08:57 -!- keinek [~Keinek@201.254.14.59] has quit [Read error: 60 (Operation timed out)] 09:16 -!- keinek_ [~Keinek@201.254.14.57] has quit [Read error: 110 (Connection timed out)] 10:08 -!- tilix [~root@212.116.139.141] has joined #t2 10:08 < tilix> rxr: what is the md5 sum for r11? 10:27 < valentin> moin 10:28 < tilix> valentin: do you know the md5sums of r10 or r11? 10:28 < tilix> i want to know what I`ve downloaded 10:28 < valentin> tilix: i can create some 10:36 < tilix> is the md5sum for r11 ce0a3e0086e9a41fbd5501c96fcba0ef ? 10:40 < valentin> f2d34ea44e57559b44069bad8e02b693 t2-live-2.2.0-alpha-r10.iso 10:40 < valentin> 971e55c12a090d3ccef74946ef8715d0 t2-live-2.2.0-alpha-r11.iso 10:40 < valentin> hm 10:40 < valentin> when did you copy r11 ? 10:40 < tilix> this night 10:40 < valentin> and wherefrom ? 10:40 < valentin> directly from rxr's box ? 10:41 < tilix> rsync -P rsync://ec-outpost.dyndns.org/public/live/t2.iso t2-live-2.2.0-alpha-r10.iso 10:41 < tilix> yes 10:41 < valentin> ok 10:41 < valentin> maybe scp to gsmp.tfh is not finished yet 10:41 < valentin> i'll give you another one 10:49 < valentin> ce0a3e0086e9a41fbd5501c96fcba0ef t2.iso 10:50 < tilix> thanks. I`m going to burn it. Btw, do you know when the network configuration system will be included? 10:56 < tilix> rebooting to test it 10:56 -!- tilix [~root@212.116.139.141] has left #t2 [] 11:15 -!- tilix [~live@212.116.139.141] has joined #t2 11:27 < valentin> hi tilix 11:27 < valentin> inside live ? 11:29 < tilix> yes 11:30 < tilix> the nvidia module works now 11:32 < valentin> i am just writing an article about the network config surface - when i finished this, i will implement the missig functionality 11:32 < valentin> *g* 11:32 < tilix> is this network config system on the cd? 11:33 < valentin> well, there is a rocknet on the cd 11:33 < valentin> so you can edit your config file and do ifup manually 11:34 < tilix> i`m using netcardconfig from knoppix 11:35 < tilix> HAL and D-BUS still doesn`t work (I guess) 11:35 < tilix> their tools crash 11:35 < valentin> .oO 11:35 < valentin> i fear you have to wait until rxr shows up here 11:36 < tilix> the problem is with dbus. hal-tools doesn`t work because there is no python-gtk on the cd 11:37 < valentin> yeah - we know that 11:57 < rxr> re 11:58 < rxr> tilix: which version did you test 11:58 < rxr> tilix: the python crap is just viewer crap 11:58 < valentin> moin rxr 11:58 < rxr> I'm not yet sure if I want to have gtk/gnome python just for demo viewers 11:58 < rxr> hi valentin 11:59 < rxr> sorry - I needed some sleep - my body did not wanted to wake up earlier ... 11:59 < tilix> hi 11:59 < tilix> i`ve tested r11 11:59 < valentin> why does the checksum of r11 differ from t2.iso ? 11:59 < rxr> valentin: t2 iso on my obelix ? 11:59 < tilix> here is the test I did: 11:59 < tilix> 1. Init script tries to modprobe rivafb and gives a warning. And still says "executing rockplug". 12:00 < tilix> 3. kword/kspread/kpresenter give: koffice (lib kofficecore): WARNING: libkspell2.so.0: cannot open shared object file: No such file or directory 12:00 < tilix> 4. kexi gives: 12:00 < tilix> kexi: WARNING: KexiConnSelector::KexiConnSelector(): no driver found for 'mysql'! 12:00 < tilix> kexi: WARNING: KexiConnSelector::KexiConnSelector(): no driver found for 'postgresql'! 12:00 < tilix> 5. Nvidia logo shows at startup, but glxinfo still gives "direct rendering: No". 12:00 < tilix> 6. ALSA still can`t be started. 12:00 < tilix> 7. koffice is 1.3.91 but Krita is not included? 12:00 < tilix> 11. dbus-tools doesn`t work, giving "Failed to open connection to session message bus: Failed to connect to socket /tmp/dbus-zH4tCOjqov: Connection refused" 12:02 < rxr> my home box did not offer r11 right now ... 12:02 < rxr> it offered r10.5 12:02 < rxr> sorry for that 12:02 < valentin> so tilix tested r10.5 12:02 < rxr> I rsynced to the UNI box - and it took so long that I went to bed ... 12:02 < rxr> now it is updated 12:02 < valentin> tilix: you hear that ? 12:02 < tilix> yes 12:02 < rxr> you need this tranfer volume to update: 12:02 < rxr> sent 20253184 bytes received 166430 bytes 154110.29 bytes/sec 12:03 < rxr> with send and receive exchanged of course ... 12:03 < rxr> tilix: so - did you got the nvidia logo as well? and it is using the binary driver now ? 12:03 < tilix> yes 12:07 < rxr> do you plan to rsync r11 ? 12:07 < tilix> resyc-ing now. i think rsync started from the beginning :( 12:08 < valentin> rxr: i think in the first version of netconf i should always enable masquerading on ppp devices if another device is up in the same profile 12:08 < valentin> later i will add masquerading configuration 12:08 < tilix> 12441643 2% 18.75kB/s 8:11:05 12:09 < rxr> that is ok, since in the beginning is the kernel - and I updated it ... 12:12 < rxr> tilix: I have to release r12 right now - due to the kernel update the radeon and nvidia driver slippt in again :-( 12:12 < rxr> but it will only differ a few bytes ... 12:12 < rxr> I'm sorry - just tell me when your r11 finished and I rsync r12 to the box - so you can rerun it to only grab that few deletions inside the iso ... 12:15 -!- _jeru [~jeru@mail.oberlinhaus.de] has joined #t2 12:15 -!- _jeru is now known as jeru 12:15 < jeru> moin 12:15 < tilix> rxr: ok 12:16 < jeru> any news regarding the livecd ? ;) 12:16 < jeru> hi tilix, rxr 12:19 < valentin> moin jeru 12:20 < jeru> hi valentin :) 12:21 < rxr> hi jeru 12:21 < rxr> livecd is comming along ... 12:23 < tilix> hi jeru 12:23 < jeru> rxr: is your rsync host running ? 12:23 < rxr> yes 12:23 < rxr> but wait some minutes 12:23 < rxr> tilix: needs to finishs r11 first before I push r12 on it ... 12:23 < jeru> ok ... syncing 12:24 < rxr> jeru: but on the other hand - quite a bit changed since your last friday or so sync 12:24 < rxr> maybe just grab r12 from the uni ... 12:24 < rxr> I can notify you in some seconds when r12 is fully there ... 12:24 < jeru> rxr: is r12 uploaded yet ? 12:24 < jeru> ok 12:24 < rxr> currently syncing 12:25 < jeru> rxr: sorry for not calling you ... but I was down (sick in bed) the most weekend ... 12:28 < jeru> rxr: can I start download ... ? ;) 12:29 < tilix> 99 % 12:31 < rxr> second 12:32 < tilix> 562352993 99% 12.02kB/s 0:03:38 12:36 < rxr> jeru: now r12 is on the gsmp box 12:37 < tilix> rxr: done 12:37 < tilix> sent 166494 bytes received 20253173 bytes 10426.18 bytes/sec 12:42 < rxr> ok - home box updated with r12 12:42 < rxr> sent 1824468 bytes received 166437 bytes 17089.31 bytes/sec 12:44 < tilix> starting 12:47 < tilix> done: sent 166501 bytes received 1824457 bytes 10451.22 bytes/sec 12:48 < tilix> rebooting to burn and test it 12:51 < rxr> Apple recently updated its iMac G5 line with faster 2.0 GHz 12:51 < rxr> PowerPC G5 processors. 12:57 < jeru> rxr: already started downloading r12 ... will be finished approx. in 30-40min. 12:58 < rxr> will you throw it into any box again? *g* 12:58 < rxr> btw. it now detects serial mices ... 12:59 < rxr> and in theory serial modems ... 12:59 < jeru> rxr: I'll test all the boxes I've around here ;) 12:59 < jeru> rxr: btw, I've one of this small Compaq Evo "ThinClients" available now 13:00 -!- tilix [~live@212.116.139.141] has quit [Read error: 60 (Operation timed out)] 13:00 < rxr> .o(this will mean a lot of feature requests again, right?) 13:00 * rxr shower, bakery and such - cu son 13:00 < rxr> +o 13:00 < jeru> + some new HP workstations which were delivered today 13:01 < rxr> yes, test them ! ;-) 13:01 < jeru> rxr: don't worry .... 13:01 < jeru> ;9 13:01 < jeru> :) 13:14 -!- tilix [~root@pppoe9.bol.bg] has joined #t2 13:15 < tilix> X doesn`t start 13:15 < rxr> ouhm 13:15 < rxr> due to some nvidia driver thing = 13:15 < rxr> ? even .. 13:16 < tilix> 1-st error: ABI mistmatch between nvidia module and libs 13:16 < rxr> oh - damn 13:16 < rxr> and, anything else ? 13:18 < tilix> second: xdetect can`t find the path for ddcprobe and lspci - says "command not found" 13:19 < tilix> libkspell2 is missing for koffice 13:19 < tilix> running 'sudo /tmp/xdetect' 13:20 < rxr> ah - but when it is run at bootup it does not yield an error about lspci, dose it sss 13:20 < rxr> ? even 13:20 < tilix> couldn`t see 13:20 < tilix> :( 13:20 < rxr> ok - new nvidia module injected - I only rebuild the kernel - did not remebered that the nvidia module is newer now . .. 13:21 < tilix> and another question - koffice is 1.4 beta 1. Why Krita is not included? 13:21 < tilix> r13? :-) 13:21 < rxr> no idea ... 13:21 < rxr> should krita be in the beta sss 13:21 < rxr> ? even ... 13:22 < rxr> checking if krita should be compiled... no 13:22 < rxr> does it need an --enable-krita=yes during configure ?!?!? 13:22 < tilix> maybe 13:23 < tilix> it`s a new app, replacement for The GIMP 13:23 < rxr> yep - saw it ... 13:24 < tilix> i saw DBUS and HAL starting. Good :) 13:24 < rxr> they do not yet work quite right on the cd 13:24 < rxr> this is on the schedule for today 13:24 < rxr> libkspell2.so.0 => not found 13:25 < rxr> there it is ... ok 13:25 < rxr> let me inejct it ... 13:25 < tilix> btw, if it doesn`t take too much space, could you add xfonts-cyrillic? 13:25 < rxr> ouhm 13:26 < jeru> rxr: I guess r13 will be available before my download from gsmp is finished ;) 13:26 < rxr> (I would need to build them first ;-) 13:26 < rxr> jeru: download and rsync later 13:26 < jeru> rxr: that was my plan ;) 13:28 -!- SerWou [~SerWou@lafilaire-3-82-224-107-105.fbx.proxad.net] has quit [Read error: 110 (Connection timed out)] 13:36 < rxr> ok - mksquash running 13:36 * rxr finally getting breakfast rolls ... 13:37 < rxr> rsync when I'm back .,. 13:37 < rxr> compression takes aprox. 15m 13:54 < jeru> rxr: do yow have experience in writing flash roms which are soldered on board ? 14:00 < tilix> rxr: kernel 2.6.11.10 has been released 14:01 < rxr> jeru: not too much 14:02 < rxr> jeru: why do you ask ? 14:02 < rxr> tilix: oh 14:03 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has joined #t2 14:04 < jeru> rxr: just opened a firewall appliance which isn't used anymore ... my hopes were that there is a CF in it but the flash is soldered on board ;) 14:05 < jeru> rxr: my plan was to "recycle" the box using T2 ;) 14:05 < rxr> sent 7819276 bytes received 166423 bytes 69744.10 bytes/sec 14:05 < rxr> much fun testing the rsync source 14:06 < tilix> hmm. it`s bigger now. I`m starting 14:06 < rxr> I hope koffice comes up, nvidia inclues the driver needed and the cyrilic fonts are included ... 14:06 < tilix> thanks 14:06 < rxr> tilix: No idea how the look like .,.. 14:06 < jeru> haven't downloaded r12 because sth screwed up my last download at 97% 14:06 < rxr> never saw them ... 14:06 < rxr> jeru: just use it as rsync base ... 14:07 < tilix> my connection "screwed" up :( 14:07 < rxr> tilix: are the fonts your normally use bitmap ones lying in the misc/ folder of x11 ? 14:07 < jeru> rxr: crappy kget was deleting it :| 14:07 < rxr> jeru: ouhm .-(( 14:07 < tilix> just a second 14:07 < jeru> rxr: but the second download I started will be finished in 10min ;) 14:08 < jeru> hopefully 14:08 < rxr> ok 14:08 * rxr breakfast ... 14:09 < tilix> well, kde is configured to use Bitstream Vera Sans, but the cyrilic font is diffrent, have to investigate it 14:10 < tilix> is there an option to set the locale? (like lang=bg in Knoppix) 14:11 < jeru> tilix: don't know if knoppix has such a feature 14:12 < tilix> jeru: you could add this line in the boot prompt 14:12 < jeru> tilix: ah I see ... have misread you question ... :) 14:13 < tilix> have to reboot now. I`ll resync later 14:13 -!- tilix [~root@pppoe9.bol.bg] has left #t2 [] 14:16 -!- jeru [~jeru@mail.oberlinhaus.de] has quit [Remote closed the connection] 15:01 < valentin> over 1000 Words now and 13 pictures to take... 15:02 < valentin> i take a shower now 15:02 < rxr> how many kB are that? 10 ? 15:02 < valentin> and then i do the pictures and clean up 15:03 < valentin> rxr: approx 10 kB 15:03 < valentin> why ? 15:03 < rxr> just so 15:03 < rxr> maybe notify the publisher that they get it today ... 15:03 < rxr> not that they drop it if the think it will not come anymore ... 15:04 < valentin> rxr: i allready had mail contact with drilling 15:04 < valentin> i told him i will finish today 15:04 < valentin> (i fear they are quite nervous because of the cd anyway) 15:06 -!- _jeru [~jeru@mail.oberlinhaus.de] has joined #t2 15:06 -!- _jeru is now known as jeru 15:07 < jeru> oh ... damn ... my laptop is saying slowly good bye ... "fan error" :/ 15:07 < rxr> I gave them the download link today 15:07 < rxr> jeru: the IBM one sss 15:07 < rxr> ? even ... 15:07 < jeru> rxr: yes 15:07 < rxr> ouhm 15:08 < jeru> hmmm ... and I can't find the 3 year warranty extension stuff ... 15:09 < jeru> rxr: I guess ... now the "small one" will getting linux on it's HDD ;) 15:11 < jeru> rxr: is "/dev/ub" udev style ? 15:13 < jeru> my external USB hdd is now available as /dev/ub/a/disc ... but before it was /dev/scsi/... 15:16 < rxr> no - ub is a f*cking annoying driver ... 15:16 < rxr> that does not even work quite right 15:16 < rxr> in which kind of system is it used ? 15:17 * sparc-kly|U5 back 15:17 < jeru> rxr: holy sh*t ... than my I forgot to include sth. in my last kernel config ... 15:18 < rxr> jeru: is the kernel selfbuilt ? 15:18 < rxr> in T2 the crappy UB driver is marked broken and should never be built ... 15:19 < jeru> rxr: yes ... it's build with a custom kernel config 15:19 < rxr> ok - grep the t2 logs for ub and you will never want to build it again 15:20 < rxr> I have no idea how such a crap code could make it into the linux kernel 15:20 < rxr> usb-storage is what you want - exclusively 15:21 < jeru> yes ... I just want to have USB storage ... 15:23 < rxr> when ub is enabled some device ids are removed from usb-storage ... 15:23 < rxr> thus just having both criples usb-storage 15:48 < valentin> re 15:49 < valentin> there is a Linux VoIP client from QSC 15:49 < valentin> but i fear it is closed source 15:51 -!- tilix [~root@212.116.139.141] has joined #t2 15:52 < tilix> i still can`t rsync due to low speed. (provider problem) 15:52 < rxr> I'll reconnect in some seconds ... :-( 15:53 < tilix> it gives me 0.2 kb per sec. for example to google.com. There IS a problem, I`ve called the support center - "Oh, since you are under Linux, we can`t help you". 15:53 < rxr> I can imagine .. 15:54 < rxr> years ago some provider help desk top me my graphic driver might be the problem and told me to visit this Windos system control thing to switch to VGA 640x840x4(bit) 15:55 < rxr> I told them that this will most probably will never make a difference and I'm not under Windows anyway ... 15:55 < rxr> they qhere puzzled and had no other advice for me, too ... 15:55 < tilix> they just told me to restart my computer ... 15:56 < tilix> it`s terrible. slower than a MODEM 15:56 < tilix> even the fastest Bulgarian servers 15:57 < tilix> and this provider puts the users behind 4 proxies 15:58 < tilix> i should switch to DSL 16:02 < tilix> rxr: could you help me a little tracing the problem (since you are outside Bulgaria)? Ping border-router.bol.bg and btk-proxy.bol.bg to see if they are available. 16:08 < valentin> rxr: how would you translate KDE panel into german ? 16:08 < rxr> oeh 16:09 < rxr> just KDE Panel ;-) ? 16:09 < rxr> PING border-router.bol.bg (193.200.15.142): 56 octets data 16:09 < rxr> 64 octets from 193.200.15.142: icmp_seq=0 ttl=46 time=112.8 ms 16:10 < rxr> PING btk-proxy.bol.bg (213.91.162.127): 56 octets data 16:10 < rxr> 64 octets from 213.91.162.127: icmp_seq=0 ttl=45 time=159.8 ms 16:10 < tilix> thanks. the problem should be incide the network then... :( 16:17 < valentin> what is the easiest way to create a (red) oval/circle around a widget in a screenshot ? 16:19 < rxr> valentin: gimp? 16:19 < rxr> or inkscape 16:19 < valentin> how in gimp (except "freehand drawing") ? 16:19 < rxr> circle tool should do 16:20 < rxr> hm - however 16:20 -!- keinek [~Keinek@201.254.9.121] has joined #t2 16:20 < rxr> valentin: this way 16:20 < rxr> do a selection - however you like ... 16:20 < rxr> e.g. a circular 16:20 < rxr> the right click 16:20 < rxr> select -> to path 16:21 < keinek> hi 16:21 < keinek> morning 16:21 < keinek> rxr i need help 16:21 < keinek> i forguet how configure pppoe 16:21 < valentin> thanx rxr 16:22 < valentin> keinek: 16:22 < valentin> ppp eth1 16:22 < valentin> pppoe 16:22 < valentin> ppp_defaults 16:22 < rxr> then open the path tool 16:22 < valentin> ppp_speed_defaults 16:22 < keinek> ok 16:22 < rxr> dialogs -> path 16:22 < rxr> +s 16:22 < keinek> and user and pass? 16:22 < valentin> ppp_option user xxxxxxxxxx 16:22 < valentin> ppp_option password xxxxxxxxxx 16:22 < rxr> and the rith click on the path and select stroke path 16:22 < valentin> ah, and do not forget the interface header 16:23 < valentin> rxr: i'll try 16:23 < keinek> thanks valentin i will try 16:30 < tilix> rxr: the support center told me that my computer must be full of viruses (even under Linux) :) :) :) 16:32 -!- tilix [~root@212.116.139.141] has left #t2 [] 16:33 < rxr> poor tilix 16:38 < jeru> re hi 16:38 < rxr> hi 16:39 < jeru> rxr: finaly my laptop is running again ... but I've to send it away anyway 16:40 < valentin> have to leave soon for breathe and push ... 16:41 < jeru> rxr: any news regarding livecd ... have finaly downloaded r12 16:42 < rxr> rsync from my box I would say and give it some spins ... 16:43 < jeru> ok syncing nwo ;) 16:44 < jeru> at what revision we are ? 16:59 -!- rxr_ [~rene@e178154181.adsl.alicedsl.de] has joined #t2 16:59 -!- Topic for #t2: T2 | 2.1.0-beta4 RELEASED | The next generation of System Development Environments (SDE) | http://www.t2-project.org/ 16:59 -!- Topic set by menomc [] [Sat Apr 16 00:33:34 2005] 16:59 [Users #t2] 16:59 [ _Lewellyn] [ jeru ] [ mnemoc] [ rxr_ ] [ valentin] 16:59 [ _Ragnar_ ] [ jsaw ] [ nzg ] [ sparc-kly ] 16:59 [ CIA-10 ] [ keinek] [ rxr ] [ sparc-kly|U5] 16:59 -!- Irssi: #t2: Total of 13 nicks [0 ops, 0 halfops, 0 voices, 13 normal] 16:59 -!- [freenode-info] help freenode weed out clonebots, please register your IRC nick and auto-identify: http://freenode.net/faq.shtml#nicksetup 16:59 -!- Channel #t2 created Sun Aug 8 21:15:33 2004 17:00 -!- keinek [~Keinek@201.254.9.121] has quit [Read error: 131 (Connection reset by peer)] 17:00 -!- Irssi: Join to #t2 was synced in 11 secs 17:07 -!- live [~live@pppoe8.bol.bg] has joined #t2 17:07 -!- live [~live@pppoe8.bol.bg] has quit [Remote closed the connection] 17:08 < valentin> cu later 17:08 < jeru> cu valentin 17:09 -!- tilix [~live@pppoe29.bol.bg] has joined #t2 17:11 < tilix> rxr: bad news: something wrong with my LAN card. Do you know a way to test it? 17:11 < tilix> a program, or a script 17:11 < jeru> tilix: what's the problem ? 17:11 < rxr_> re# 17:12 < tilix> the problem is that it makes a very big "packet loss" 17:13 < jeru> tilix: do you have experienced such a behavior with the same NIC/Switch combination too ? 17:13 < jeru> tilix: what NIC do you use ? 17:16 -!- rxr [~rene@e178162173.adsl.alicedsl.de] has quit [Read error: 110 (Connection timed out)] 17:16 -!- tilix [~live@pppoe29.bol.bg] has quit [Remote closed the connection] 17:21 < jeru> rxr_: syncing livecd done 17:25 -!- sparc-kly|U5 is now known as sparc-kly[WORK] 17:47 < jeru> rxr_: btw, is the mailserver down ? 17:48 < jeru> no commit messages anymore ... 17:50 < rxr_> hm 17:50 < rxr_> oh - yeah - damn 17:51 -!- You're now known as rxr 17:53 < jeru> ,oO( a good man this rxr is)o 17:53 < jeru> rxr: livecd is functioning on the Compaq d330m GeForce box ;) 17:53 < CIA-10> rene * r8909 /trunk/target/livecd/ (fixedfiles/ rootfs/): * renamed livecd/fixedfiles to rootfs - as in embedded and psion-pda 17:54 < jeru> rxr: everything seems to be loaded properly, even the gigabit nic + sound is functioning too ;) 17:54 < rxr> new hardware to add ? 17:54 < jeru> yep ... 17:54 < CIA-10> chris * r8913 /trunk/package/security/fwbuilder/fwbuilder.desc: * updated fwbuilder (2.0.5 -> 2.0.7) 17:55 < jeru> btw, the TFT issue seems to be solved too 17:55 < rxr> jeru: is this on nvidia ? 17:55 < jeru> rxr: yes :) 17:55 < rxr> is the nvidia driver used properly ? 17:55 < CIA-10> rene * r8910 /trunk/target/livecd/rootfs/ (XF86Config inittab login-shell system): 17:55 < CIA-10> * removed all the rootfs content - since it is pure crap - new stuff 17:55 < CIA-10> will appear soon 17:56 < CIA-10> chris * r8914 /trunk/package/perl/perl-xml-parser/perl-xml-parser.desc: * changed [P] to 139.000 because intltool needs it 17:56 < CIA-10> rene * r8908 /trunk/target/livecd/ (default.pkgsel pkg_gawk.conf pkg_modutils.conf): 17:56 < CIA-10> * added kdebase tweak to the livecd and removed the obsolete modutlis 17:56 < CIA-10> and gawk modifications ... 17:56 < jeru> rxr: yes ... it's loaded properly 17:58 < jeru> rxr: you should have all the specs for the web site update 17:58 < CIA-10> rene * r8907 /trunk/package/base/linux26/linux26.desc: * updated linux26 (2.6.11.9 -> 2.6.11.10) 17:58 < jeru> it's the HP/Compaq d330m box 17:58 < CIA-10> chris * r8912 /trunk/package/security/libfwbuilder/libfwbuilder.desc: * updated libfwbuilder (2.0.5 -> 2.0.7) 18:00 < rxr> jeru: ok 18:00 < CIA-10> rene * r8911 /trunk/target/livecd/download.txt: 18:00 < CIA-10> * removed syslinux download, we'll use grub, and syslinux should not 18:00 < CIA-10> be downloaded this way anyway 18:01 < jeru> rxr: testing the new boxes now, which arrived today 18:01 < rxr> nice 18:01 < rxr> I'm particularly proud of the new serial mice detection ,-) 18:02 < jeru> rxr: hehe :) 18:04 < jeru> rxr: but I remember, that the serial mouse connected to the d330m was also working before ... what's your new hack all about ? 18:05 < rxr> a serial mouse connected to a standard 16xxx UART ? 18:05 < rxr> aka COM1 / COM2 ? 18:07 < jeru> rxr: ahh! damn sorry ... no it's PS2 of course ;) 18:07 < rxr> yep PS2 just worked before ... 18:08 < jeru> rxr: on the new box which is connected to 15" CRT Nokia -> "Signal out of range" 18:08 < rxr> oh CRT ... 18:08 < rxr> what does ddcprobe say ? 18:09 < jeru> rxr: yes CRT ... I guess it should work with it too ;) 18:09 < jeru> mom ... checking 18:16 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has quit ["Leaving"] 18:18 < mnemoc> moin 18:18 < rxr> moin mnemoc 18:18 < mnemoc> rxr: apropos 8911, how do you think target specific downloads be downloaded? 18:18 < mnemoc> hi rxr 18:19 < jeru> hi mnemoc 18:19 < mnemoc> hi jeru 18:20 < rxr> downloading syslinux redundantly is definetly not the way - one package for it should be enough ... 18:21 < mnemoc> but syslinux is used by build.sh in this case 18:23 < rxr> mnemoc: free pascal package - to be named fpc or freepascal ? 18:23 < mnemoc> rxr: how do they call it? 18:23 < rxr> freepascal and fpc ... 18:24 < rxr> the source file is named fpc-2.0.0.tar.gz ... 18:24 < mnemoc> i would vote for fpc in that case 18:24 < mnemoc> but mono vs. mcs is the oposite case 18:24 < mnemoc> nah... fpc :) 18:24 < mnemoc> what do you prefer? 18:25 < jeru> have to reboot ... rxr will send you the output thereafter 18:25 -!- jeru [~jeru@mail.oberlinhaus.de] has quit ["using sirc version 2.211+KSIRC/1.3.12"] 18:25 < rxr> fpc is a bit cryptic 18:25 -!- tilix [~live@pppoe44.bol.bg] has joined #t2 18:25 < rxr> I consider renaming my just started package to freepascal 18:25 < tilix> rxr: r13 rocks :) 18:26 < mnemoc> r13?! 18:26 < mnemoc> rxr: same with mono and mcs :) 18:26 < tilix> isn`t the latest r13? 18:26 < mnemoc> mine is r10 :p 18:26 < mnemoc> i have been away to long 18:27 < rxr> tilix: yep ... 18:27 < tilix> ark isn`t in the cd 18:28 < rxr> damn - my disk in the GSMP box is dieing more and more 18:30 < rxr> tilix: does koffice work now ? 18:33 < rxr> damn 18:33 < rxr> seems fpc needs pascal ... 18:33 < rxr> to build .. 18:34 < mnemoc> egg/chicken? 18:34 < rxr> yes - as ada 18:36 -!- _jeru [~jeru@mail.oberlinhaus.de] has joined #t2 18:36 -!- _jeru is now known as jeru 18:36 < jeru> re 18:36 < jeru> rxr: you should have new mail 18:37 -!- maddin [~martin@pD9E72CEB.dip.t-dialin.net] has joined #t2 18:37 < CIA-10> rene * r8915 /trunk/package/develop/fpc/ (. fpc.desc): * added fpc (2.0.0) - disabled by default - needs Pascal to build ... 18:37 < maddin> hi 18:38 < jeru> hi maddin 18:38 < mnemoc> rxr: fpc? 18:38 < mnemoc> hi maddin 18:38 < maddin> Is there a bug in t2Live r12? grub can't find the kernel 18:38 < maddin> hi jeru, mnemoc 18:39 < rxr> mnemoc: r11 ? 18:39 < mnemoc> :) 18:39 < mnemoc> ma 18:39 < rxr> mnemoc: free pascal compiler 18:39 < rxr> maddin: maybe this is due to a bad sector on the gsmp disc ... :-((( 18:39 < mnemoc> rxr: I consider renaming my just started package to freepascal 18:40 < rxr> mnemoc: decided against it - fpc is used on the net ... 18:40 < mnemoc> ok 18:40 < maddin> rxr: So, I can't test r12 now? 18:40 < rxr> r12 is not yet there, right ? 18:40 < rxr> ah - sorry 18:40 < rxr> me confused 18:41 < maddin> r12 is the last version ?! 18:41 < rxr> maddin: I copy the next right now ... 18:41 < mnemoc> rxr: r13 rocks :) 18:41 < rxr> tilix has it from my home box 18:41 < rxr> I copy that one to the server right now .. 18:42 < mnemoc> rsync = r13? 18:42 < rxr> yes 18:42 < maddin> rxr: I'm home now. The download-time is faster at uni :( 18:42 < rxr> maddin: it will be at gsmp in some minutes 18:43 < rxr> you could also rsync the few missing bits ... 18:43 < rxr> rsync -P rsync://ec-outpost.dyndns.org/public/live/t2.iso your-download-file.iso 18:44 < mnemoc> r10->r13 is slow :( 18:44 < maddin> wow, it's realy easy?! never use rsync 18:44 < tilix> the DEL key doesn`t work in Konsole. It prints ~ 18:44 < rxr> yep a lot changed 18:44 < rxr> tilix: no idea ... 18:44 < mnemoc> maddin: rsync will change your life for ever 18:44 < rxr> tilix: in the latest version I set the X keyboard according to the kpersonalizer language 18:44 < rxr> did you select your language ? 18:45 < maddin> mnemoc: I will hope it :-) 18:45 < tilix> Only Bulgarian locale, kdei18n_bg is not available 18:45 < rxr> tilix: ok - me packaging ... 18:45 < mnemoc> tilix: doesn't exist or we don't have it? 18:45 < rxr> mnemoc: we don't have 18:45 < mnemoc> :) 18:45 < rxr> we only have the ones used by us so far since the all-in-one file is 100MB++ 18:46 < mnemoc> kde :) 18:46 < mnemoc> how can a bunch of translation weight that? 18:47 < CIA-10> rene * r8916 /trunk/package/kde/kde-i18n-bg/: * prepared kde-i18n-bg 18:47 < rxr> mnemoc: a lot of strings ? 18:47 < tilix> rxr: thanks 18:47 < jeru> rxr: damn ... my collegues have moved away the small Compaq Evo I wanted to test :/ 18:48 < tilix> anybody expert in mysql? 18:48 < jeru> rxr: btw, what about supported NICs ... you can add tg3 too (HP d330m) 18:48 < rxr> jeru: is it missing or do you report it working ? 18:49 < jeru> rxr: It's missing and I reported that it's working 18:50 < rxr> jeru: what frequency should the above monitor use ? 18:50 < rxr> can you check if removing the lines: 18:50 < rxr> HorizSync 24.0 - 80.0 18:50 < rxr> VertRefresh 50-100 18:50 < rxr> from the xorg.conf make it work ? 18:51 < jeru> rxr: oh ... that's a good question ... one moment please 18:51 < jeru> ok 18:51 < jeru> have to boot this box again because I moved to the next candidate ;) 18:52 < jeru> rxr: e100 NICs are also working 18:54 < rxr> can you paste the full ID string here ? 18:54 < rxr> of both tg4 and e100 18:54 < rxr> tg3 even 18:54 < rxr> == 05/17/05 18:53:50 =[9]=> Finished building package kde-i18n-bg. 18:55 < CIA-10> rene * r8917 /trunk/package/kde/kde-i18n-bg/ (7 files): * finalized the kde-i18n-bg package 18:56 < jeru> rxr: I guess the 15" nokia CRT wants to have 75Hz 18:58 < rxr> does removing the refresh lines make it work ? 18:58 < rxr> jeru: the compaq Broadcom Corporation NetXtreme BCM5782 Gigabit worked sss 18:58 < rxr> ? even ... 18:58 < jeru> rxr: if this is the one from the d330m -> yes 18:59 < mnemoc> jeru: how can i set epoz or kupu to be _the_ default editor? 18:59 < jeru> rxr: removing the lines in xorg,con was successful 18:59 < rxr> what is the CPU in the Compaq/HP d330m ? 18:59 < jeru> mnemoc: oh! I think it was set in the Plone Control Panel 18:59 < mnemoc> jeru: was? 19:00 < jeru> rxr: P4 2.8Ghz 512 MB RAM 19:00 < rxr> thanks 19:00 < jeru> mnemoc: do you speak german ? 19:00 < mnemoc> jeru: babel does 19:01 < jeru> mnemoc: mom ... have to start zope/plone 19:01 < rxr> jeru: for the new nics and boards please a new report ,-) 19:01 < rxr> so I do not mix this all up 19:01 < mnemoc> jeru: do you speak spanish? http://www.geeks.cl/~amery/Raulitio%20el%20Friki/ 19:02 < jeru> mnemoc: you know ... I don't :) 19:02 < mnemoc> :| 19:03 < jeru> mnemoc: I thought it was configured in Plone Setup ... but only the external editor feature is configured there 19:04 < jeru> mnemoc: as far as I see one can configure the editor in the personal settings 19:05 < jeru> my preferences blah ... 19:05 < jeru> but have no idea how to set it system wide 19:05 < mnemoc> jeru: portal_memberdata/properties -> wysiwyg :) 19:05 < jeru> for now at least 19:05 < jeru> :D 19:06 < jeru> mnemoc: please paste your knowledge in text file please ;) 19:06 < mnemoc> jeru: have you tried ldap groups with non DN membership? 19:06 < mnemoc> jeru: what text file? 19:06 < jeru> mnemoc: no sorry 19:06 < jeru> mnemoc: just create a textfile for me with all the things you find out ;) 19:07 < jeru> mnemoc: or create sth. else what I can read ;) 19:07 < mnemoc> rxr: what do you think it's cleaner, java and mono on stage 3 or java and mono at early prio? 19:07 < mnemoc> jeru: ok :) 19:07 < rxr> early prio 19:08 < mnemoc> rxr: qok 19:09 < jeru> .oO( I've to burn a second livecd for testing)o 19:09 < rxr> ? 19:09 < mnemoc> -q 19:09 < mnemoc> t2.iso 22437995 3% 2.26kB/s 66:42:36 :'( 19:10 < jeru> rxr: just for testing more than one machine at once 19:10 < maddin> 555790036 98% 8.01kB/s 0:20:29 :) 19:11 < mnemoc> maddin: what are you updating? 19:11 < mnemoc> maddin: i had r10 19:11 < rxr> r12 crippled to r12 I think 19:11 < maddin> mnemoc: t2-live-2.2.0-alpha-r12.iso 19:12 < rxr> I'm right now optimizing the xorg config ... 19:12 < rxr> to only inject vert and hoiz defines when no DDC is present ... 19:12 < rxr> maddin: T2 r12 is the first Linux version I know off that is capable to detect serial mices ... 19:12 < rxr> just as an example where we are heading ... 19:12 < rxr> T2 @Live 2.2 will become the most easy to use operating system ever ... 19:13 < rxr> that is my master plan right now ... 19:13 < maddin> rxr: I have read it 19:13 < rxr> it even can detect serial connected modems ... 19:13 < rxr> just valentin needs to incooperate that into his upcomming graphical network tool 19:13 < tilix> rxr: good 19:14 < rxr> and later on we will discover dhcp by default as well as try to guess the default router and save IP on network traffic if any ... 19:14 < maddin> firewire hd work, too? it is tested? 19:14 < mnemoc> rxr: how? 19:14 < rxr> firewire CD-ROM worked 19:14 < maddin> I can test HD, too. 19:15 < rxr> mnemoc: test if the NIC has a link - if yes try DHCP - if this fails listen to the traffic for say 3 seconds - if traffic parse the routed out of that and take an IP that appears unused ... 19:15 < rxr> just as default for first boot - until the user defines s.th. in the ez-net-conf 19:16 < mnemoc> :D 19:16 < maddin> Is there a configuration file, which is loading at boot-time (from floppy, hd) for my settings? 19:16 < mnemoc> rxr: have you tried arpwatch-NG? 19:17 < rxr> nope 19:20 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has joined #t2 19:20 < sparc-kly> i install today T2 desktop 19:20 < sparc-kly> but i have network problem 19:21 < mnemoc> sparc-kly: what network problem? 19:21 < sparc-kly> i dont have internet . :S only have access in my lolcal network . 19:22 < mnemoc> sparc-kly: paste me on query your etc/conf/network (or etc/network/config if the iso is old) 19:22 < sparc-kly> 0ok wait 19:24 < jeru> ok ... have to move away now... cu later ... 19:24 < sparc-kly> my config esta en blanco 19:25 < mnemoc> sparc-kly: so write it :) 19:26 < mnemoc> sparc-kly: stone network can help you 19:26 < sparc-kly> root@amd:~# ifconfig 19:26 < sparc-kly> eth0 Link encap:Ethernet HWaddr 00:0A:E6:26:73:1C 19:26 < sparc-kly> inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 19:26 < sparc-kly> inet6 addr: fe80::20a:e6ff:fe26:731c/64 Scope:Link 19:26 < sparc-kly> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 19:26 < sparc-kly> RX packets:1427 errors:0 dropped:0 overruns:0 frame:0 19:26 < sparc-kly> TX packets:1157 errors:0 dropped:0 overruns:0 carrier:0 19:26 < sparc-kly> collisions:0 txqueuelen:1000 19:26 < sparc-kly> RX bytes:525815 (513.4 Kb) TX bytes:144508 (141.1 Kb) 19:26 < sparc-kly> Interrupt:11 Base address:0xd400 19:26 < sparc-kly> q va en ese file 19:26 < sparc-kly> en config 19:27 < mnemoc> uhm 19:27 < mnemoc> iirc network config is documented 19:27 < sparc-kly> yo estoy conectado via ssh aqui en mi network local a T2 pero si hago un ping hacia afuera me jodo . 19:28 < mnemoc> sparc-kly: _english_ here please 19:28 < mnemoc> sparc-kly: or query 19:28 < sparc-kly> im sorry . 19:29 < sparc-kly> paste me wtf ypu have in /etc/network/config 19:29 < mnemoc> stone network should guide you but minute 19:32 < rxr> next t2 live release in 30min++ I hope 19:32 < rxr> with enhaced xorg.conf and kdeutils ,-) 19:32 < rxr> (for ark and friends) and more correct dbus usage ... 19:32 < mnemoc> rxr: i'm still downloading r13 :( 19:32 < jeru> rxr: oh! but unfortunately I've to leave now ... 19:33 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has quit ["leaving"] 19:33 < jeru> bye bye 19:33 -!- jeru [~jeru@mail.oberlinhaus.de] has quit ["using sirc version 2.211+KSIRC/1.3.12"] 19:34 < tilix> rxr: i`ll sync to t14 tomorrow. I have to leave now 19:34 < tilix> bue 19:34 < tilix> bye 19:34 < tilix> :) 19:35 -!- tilix [~live@pppoe44.bol.bg] has left #t2 [] 19:42 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has joined #t2 19:43 < sparc-kly> shit same problem 19:43 -!- CIA-10 [~CIA@flapjack.navi.cx] has quit [Excess Flood] 19:43 < sparc-kly> T2 | 2.1.0-beta4 RELEASED | The next generation of System Development Environm 19:43 < sparc-kly> 17:13 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has joined #t2 19:43 < sparc-kly> 17:13 -!- Topic for #t2: T2 | 2.1.0-beta4 RELEASED | The next generation of 19:43 < sparc-kly> System Development Environments (SDE) | http://www.t2-project.org/ 19:43 < sparc-kly> 17:13 -!- Topic set by menomc [] [Fri Apr 15 22:33:34 2005] 19:43 < sparc-kly> 17:13 [Users #t2] 19:43 < sparc-kly> 17:13 [ _Lewellyn] [ CIA-10] [ maddin] [ nzg] [ sparc-kly ] [ valentin] 19:43 < sparc-kly> 17:13 [ _Ragnar_ ] [ jsaw ] [ mnemoc] [ rxr] [ sparc-kly[WORK]] 19:43 < sparc-kly> 17:13 -!- Irssi: #t2: Total of 11 nicks [0 ops, 0 halfops, 0 voices, 11 normal] 19:43 < sparc-kly> 17:13 -!- Channel #t2 created Sun Aug 8 19:15:33 2004 19:43 -!- CIA-10 [~CIA@flapjack.navi.cx] has joined #t2 19:43 < sparc-kly> 17:13 -!- Irssi: Join to #t2 was synced in 0 secs 19:43 < sparc-kly> 17:13 < sparc-kly> shit same problem 19:43 < sparc-kly> sorry 19:43 < sparc-kly> i hate my mouse config 19:44 < mnemoc> sparc-kly: do you have dhcp? 19:44 < mnemoc> sparc-kly: to set it static do: 19:44 < mnemoc> ip 192.168.5.100/24 19:45 < mnemoc> gw 192.168.5.1 19:45 < mnemoc> nameserver 192.168.5.2 19:45 < sparc-kly> i have dhcp 19:45 < maddin> r12: mplayer missed libbio3jack.so.0 19:47 < sparc-kly> i look this machine in router 19:47 < mnemoc> sparc-kly: did you change your init to stage 3+ ? 19:48 < sparc-kly> no 19:48 < maddin> r12 BUG: xscreensaver-demo missed libglade-2.0.so.0 19:49 < mnemoc> sparc-kly: /etc/rc.d/init.d/network start 19:49 < rxr> maddin: oh 19:49 < sparc-kly> root@amd:~# /etc/rc.d/init.d/network start 19:49 < sparc-kly> Setting up network devices. .......................................................................................................................................... v 19:50 < sparc-kly> Unknown profile: 'default' :-( 19:50 < sparc-kly> profile ? 19:51 < sparc-kly> wait im back in minute 19:51 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has quit ["Lost terminal"] 19:51 < maddin> rxr: which software is use openGL and is add to t2@live? some screenserver? to test openGL-support 19:53 < rxr> maddin: with nvidia ? 19:54 < maddin> yes 19:55 < rxr> that will not work yet 19:55 < rxr> because the f*cking nvidia crap needs it's on libraries ... 19:55 < rxr> however I could add copying them to the right place if nvidia hardware is detected to the next version ... 19:56 < rxr> ok - xscreensaver libs added ... 19:57 < maddin> rxr: mplayer missed libbio3jack.so.0 19:57 < rxr> oh 19:57 < rxr> thanks 19:58 < rxr> ldd /usr/bin/mplayer 19:58 < rxr> are more listed to be missing ? 19:58 < maddin> rxr: Firewire-Harddisk work fine (SBP2) 19:58 < rxr> good 19:58 < rxr> automounting will come soon 19:59 < maddin> do you use automount? 19:59 < rxr> libjack is missing as well 19:59 < rxr> we'll use D-BUS / HAL for really sophisticated device discovery, auto mounting and user mounting 19:59 < rxr> T2 @Live will rock in some days 19:59 < maddin> it's fine 20:00 < _Lewellyn> rxr: i'm looking forward to upgrading from rock to T2, once your live stuff is released as part of a full release :) 20:00 < maddin> Knoppix will show the partition as KDE-Desktop-Icons. It's a good idea 20:01 < rxr> knoppix consists of nothing but hacks ... 20:01 < rxr> T2 will use a real infrastructure for this ... 20:01 < maddin> okay, but it must good work and must be easy for all users 20:02 < rxr> maddin: if it would not be good I wouldn't use it ... 20:02 < _Lewellyn> rxr: out of curiosity, which ksh does t2 include? pdksh or the real ksh? 20:03 < rxr> so far only pdksh 20:03 < rxr> in the shell repository we have: 20:03 < rxr> ash bash bashcompletion dash kiss mc pdksh sash tcsh zsh 20:04 < rxr> seems my disk is really falling apart .. 20:04 < rxr> damn 20:04 < _Lewellyn> hrm. can i request "real" ksh? :) 20:04 < rxr> sure ... 20:04 < _Lewellyn> i find the whole ast thing too difficult to actually get it compiled 20:04 < rxr> if it comiples we are open to add it - or accept a patch to do so ,-) 20:04 < _Lewellyn> and pdksh is subtly incompatible. 20:05 < _Lewellyn> http://www.research.att.com/sw/download/ is the location to obtain it. 20:05 < rxr> ok - I add it soon 20:06 < _Lewellyn> it's supposedly easy to script the install, but i can never get it to work. 20:06 < _Lewellyn> so i live with things like a broken typeset ;) 20:06 < rxr> hm 20:06 < rxr> it compiles but has runtime errors ? 20:06 < _Lewellyn> no, i can never get their package script to work. 20:06 < _Lewellyn> i'll try it again in a few mins. 20:12 -!- SerWou [~SerWou@lafilaire-3-82-224-107-105.fbx.proxad.net] has joined #t2 20:12 -!- SerWou [~SerWou@lafilaire-3-82-224-107-105.fbx.proxad.net] has quit [Client Quit] 20:12 -!- SerWou [~SerWou@lafilaire-3-82-224-107-105.fbx.proxad.net] has joined #t2 20:19 < maddin> rxr: add xlock to t2@live ? 20:19 < rxr> maddin: ok - but not in the enxt days 20:19 < rxr> maddin: can you prepare some sheet where you write such things down? 20:21 < maddin> yes, i can do it. but have not realy time for testing t2 20:21 < rxr> you do right now ... 20:26 < _Lewellyn> rxr: RE: ksh. if you follow the {ksh} link rather than ast-ksh, you get a binary. That is probably far easier than dealing with the ast source system. 20:26 < rxr> _Lewellyn: we only build from source ... 20:26 < rxr> the only exeption is for proeritary stuff where no source ie available ... 20:26 < rxr> such as java or nvidia crap ... 20:28 < _Lewellyn> rxr: i'm still working on getting it to build from source. i'm gonna be stubborn this time. 20:28 < _Lewellyn> but in the mean time, i have a working real ksh for the first time on this machine. 20:29 < rxr> on my box is what I might label r14 ... 20:29 < rxr> for the people rsyncing ... 20:32 < _Lewellyn> rxr: apparently, the latest information on at&t's site for building from source works well. 20:32 < rxr> nice 20:32 * rxr off a bit - cu later 20:32 < _Lewellyn> adios 20:32 < _Lewellyn> have a good night 20:32 < maddin> bye rxr 20:44 -!- CIA-10 [~CIA@flapjack.navi.cx] has quit [Excess Flood] 20:45 -!- CIA-10 [~CIA@flapjack.navi.cx] has joined #t2 21:03 -!- CIA-10 [~CIA@flapjack.navi.cx] has quit [Excess Flood] 21:03 -!- CIA-10 [~CIA@flapjack.navi.cx] has joined #t2 21:13 < rxr> re 21:22 < _Lewellyn> hoi 21:24 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has joined #t2 21:25 < sparc-kly> anyone help me to set my network here ? 21:26 < mnemoc> what do you need? 21:41 < rxr> _Lewellyn: I find the ast-ksh a bit ugly to package, could you do so ? 21:45 < _Lewellyn> i'm still trying to figure out exactly what would be needed to package it 21:45 < _Lewellyn> is testing the binary important? 21:46 < _Lewellyn> also, the pdksh manpage will have to no longer be called ksh.1 21:56 -!- sparc-kly [~mubex@66-50-33-174.prtc.net] has quit ["Lost terminal"] 21:56 < rxr> _Lewellyn: I can fix the later easily .. 21:56 < _Lewellyn> ya, i figured that would be easy. but i just noticed that ;) 21:56 < rxr> no - testing the binary is not needed 21:58 < _Lewellyn> ok. let me figure out what is actually needed to get the thing working. 21:58 < rxr> do you work on a t2 checkout ? 21:58 < _Lewellyn> should localization be included, or would that be an additional package. 21:58 < _Lewellyn> no t2 for me yet. 21:59 < _Lewellyn> which is why i was asking about upgrade paths from rock. 21:59 < rxr> the 2.1 path is "drop in replacement"? 21:59 < rxr> s/?// 22:02 -!- sparc-kly [~t2@66-50-33-174.prtc.net] has joined #t2 22:02 < _Lewellyn> and then upgrading to 2.2 should be fairly simple, right? 22:05 < sparc-kly> i start a livecd build 22:10 -!- mnemoc_ [~amery@200.75.27.87] has joined #t2 22:10 < rxr> sparc-kly: the live-cd target is not yet complete ... 22:10 < rxr> I recommend not to build it right now ... 22:11 -!- mnemoc [~amery@200.75.27.17] has quit [Read error: 110 (Connection timed out)] 22:22 < maddin> gn8 all 22:22 -!- veki [~chatzilla@217.24.19.40] has joined #t2 22:22 < _Lewellyn> sleep well, maddin 22:22 < _Lewellyn> rxr: i may upgrade to t2 this evening (pacific time) 22:22 < _Lewellyn> any caveats i should be aware of? 22:23 < sparc-kly> desktop is complete ? 22:23 -!- maddin [~martin@pD9E72CEB.dip.t-dialin.net] has quit ["i'm away ...."] 22:23 < veki> #wikimedia 22:23 < veki> hi all 22:24 < rxr> _Lewellyn: please use the 2.1 branch ,-) 22:29 -!- veki [~chatzilla@217.24.19.40] has left #t2 [] 22:30 < _Lewellyn> i should use the latest beta iso to install? 22:30 < mnemoc_> uhm 22:30 < mnemoc_> last ISO is beta3 .... but updating from beta3 to rc1 is not O(1) 22:31 < _Lewellyn> is there a planned iso for rc1? 22:31 < mnemoc_> but you can build rc1 on beta3 without torbules :) 22:31 < _Lewellyn> i'd rather not deal with building rc1 right now. 22:31 < rxr> yes - when we tag rc1 there will be an iso 22:31 < mnemoc_> _Lewellyn: i need to finish java problems before releasing it 22:31 < _Lewellyn> about to upgrade machines, and i'm behind at work. 22:32 < _Lewellyn> waiting for an api to be finalized before i do too much work today :) 22:38 < _Lewellyn> rxr: what path should ksh install to? 22:39 -!- sparc-kly[WORK] [~mubex@66-50-123-218.prtc.net] has quit [Read error: 110 (Connection timed out)] 22:40 < CIA-10> amery * r8918 /trunk/misc/share/PKG-FLAGS: * added KAFFE package flag 22:41 < rxr> but that is easily tweakable I hope .. 22:41 < rxr> in fact it should honor the $prefix variable 22:44 < rxr> oh my /bin got lost ... 22:44 < CIA-10> amery * r8919 /trunk/package/java/java-dirtree/ (java-common-conf.in java-conf.in parse-config): 22:44 < CIA-10> * splitted java-conf.in into java-common-conf.in, java-conf.in and parse-config 22:44 < CIA-10> * changed JAVA_HOME detection to try kaffe if package has KAFFE flag 22:44 < CIA-10> * set CLASSPATH on parse-config 22:44 < _Lewellyn> i'm rereading how packages work. been a while. 22:46 < rxr> mnemoc_: KAFFE for ? 22:47 < mnemoc_> java packages which build with kaffe 22:47 < mnemoc_> all build with sun and ibm thing. but not all with kaffe 22:47 < mnemoc_> like dietlibc ;) 22:49 < rxr> ic - good to know ,-) 22:51 < rxr> cool 22:52 < rxr> I just inserted an audio disk in my DVD and got a bunch of HAL stuff scrolling by discovering insertion of a audio cd ... 22:52 < rxr> quite interesting ... 22:53 < rxr> 3982: 22:50:43.919: probe-volume.c:217: Disc in /dev/hdb has audio 22:53 < rxr> 22:50:43.941 [I] blockdev.c:169: Update mount point for /org/freedesktop/Hal/devices/volume_part_1_size_601683968 (device_file /dev/hdb) 22:53 < rxr> 22:50:43.941 [I] blockdev.c:194: Clearing mount point for /dev/hdb 22:59 < valentin> re 23:00 < rxr> rehi valentin 23:00 < rxr> valentin: you also want a linux where an audio cd insertion starts your favourite KDE audio cd player ? 23:01 < valentin> oehm - i cannot insert an audio cd while the live cd is in the drive 23:02 -!- mnemoc_ [~amery@200.75.27.87] has quit [Read error: 60 (Operation timed out)] 23:03 < valentin> autostart would be a nice feature, though i would turn it of in my personal installation 23:04 < rxr> how war your breath course ? 23:05 < valentin> quite good 23:05 < valentin> i was surprised how exhausting some of the techniques are 23:05 < valentin> if you have to do it for 90 seconds 23:07 < valentin> grummel 4.0 is out 23:08 < rxr> ? 23:08 < valentin> grummel is a knoppix variant for "sysadmins" whatever the f. that means 23:09 < rxr> guess not the best 23:11 -!- sparc-kly [~t2@66-50-33-174.prtc.net] has quit [Remote closed the connection] 23:13 -!- sparc-kly [~t2@66-50-33-174.prtc.net] has joined #t2 23:13 -!- sparc-kly [~t2@66-50-33-174.prtc.net] has quit [Read error: 104 (Connection reset by peer)] 23:14 < CIA-10> rene * r8920 /trunk/package/base/sysfiles/etc_shells.txt: * added pdksh to /etc/shells 23:15 -!- sparc-kly [~t2@66-50-33-174.prtc.net] has joined #t2 23:15 < _Lewellyn> rxr: i'm almost done with the att ksh package. 23:16 -!- sparc-kly [~t2@66-50-33-174.prtc.net] has quit [Remote closed the connection] 23:16 < rxr> and I mostly cleaning the pdksh package ,-) 23:17 < rxr> valentin: I should have added a headphone amp to the tiny self-made amplifier of us 23:23 < valentin> yeah - i know 23:24 < rxr> today is not my day - made the 3 typos in a single line 23:24 < _Lewellyn> hm. are there any examples of packages which don't use make? 23:24 < rxr> and needed three trail'n error to find them all ... 23:24 < rxr> there should be quite a few ... 23:24 < rxr> I think this should do: 23:25 < rxr> makeopt="" 23:25 < rxr> makeinstopt="" 23:25 < rxr> hook_add inmake 5 "what you wanna do" 23:25 < _Lewellyn> ah. ok. .conf files are not well documented in the handbook :/ 23:28 < rxr> /usr/src/t2-trunk/build/default-2.2.0-alpha-x86-pentium-mmx-desktop/TOOLCHAIN/tools.native/wrapper/install -c -m 644 ksh.1 /usr/man/man1/`echo ksh|sed 's/ksh/pdpdksh: bin/pdksh 23:28 < rxr> pdksh: usr/share/man/man1/pdksh.1 23:28 < rxr> oops .. 23:28 < rxr> first one should have been: 23:28 < rxr> pdksh: bin/pdksh 23:33 < CIA-10> rene * r8921 /trunk/package/shells/pdksh/pdksh.conf: 23:33 < CIA-10> * rewrote pdksh without so much legacy code 23:33 < CIA-10> * install as pdksh (leave ksh for the AT&T original) 23:33 < _Lewellyn> i think all i have left is getting it installed now :) 23:34 < _Lewellyn> my poor slow machine, spending all day compiling ;) 23:36 < rxr> Gentoo's Portage to be ported to Windows Services for UNIX 23:37 < _Lewellyn> poor windows users 23:37 < rxr> http://osnews.com/story.php?news_id=10616 23:38 < _Lewellyn> what sfu needs is to be integrated into the normal windows systems 23:38 < _Lewellyn> such as add/remove programs 23:40 < rxr> http://www.kdedevelopers.org/node/view/1049 23:43 -!- mnemoc [~amery@200.75.27.22] has joined #t2 23:45 * _Lewellyn sighs 23:45 < _Lewellyn> i think everyone had unrealistic expectations in regards to safari 23:45 < mnemoc> re :( 23:45 < _Lewellyn> mnemoc: i thought you were going to sleep? 23:46 < mnemoc> 17:47 here :) 23:47 < _Lewellyn> oh 23:47 < mnemoc> my ISP got a radius problem 23:47 < _Lewellyn> ah. yes. you're on a dsl line in santiago :) 23:47 < rxr> _Lewellyn: what do you mean with safari ? 23:48 < _Lewellyn> rxr: the whole khtml brouhaha 23:48 < rxr> we have apple hardware and boot osx sometimes ... - safari is not such a mavolous browser 23:48 < rxr> in fact this de-mavelous is true for the whole osx beast ... 23:48 < mnemoc> _Lewellyn: rancagua :) 23:48 < _Lewellyn> apple has a well-known history of not even letting bug reporters know the status of their bugs. why would their source control be any looser? 23:49 < _Lewellyn> mnemoc: close enough. i bet the lat and long i have is probably a bit off, too :) 23:50 < mnemoc> :) 23:50 < mnemoc> what do you use to whois? 23:51 < _Lewellyn> internal tools. i'm still waiting for sample code in the office, so i'm tinkering. 23:51 < _Lewellyn> i don't think my nds lets me give more details. :( 23:51 < _Lewellyn> nda 23:51 < _Lewellyn> which is really sad because we do some really cool stuff :) 23:52 < rxr> _Lewellyn: how is ksh don' ? 23:52 < _Lewellyn> waiting for Yet Another Build. 23:52 < _Lewellyn> i have it eating one cpu, and a kernel compile eating the other. 23:53 < rxr> _Lewellyn: maybe you post your companies web address so we could take a guess in which field you are working ? 23:53 < _Lewellyn> www.kefta.com 23:53 < _Lewellyn> our site is way too filled with marketing-speak 23:54 < _Lewellyn> in fact, our site almost makes us look sleazy :( 23:56 < rxr> oh - san francisco ,-) 23:57 < _Lewellyn> yup 23:57 < _Lewellyn> 3pm. lunchtime here. 23:57 < rxr> oh - nearly 0:00 here .. --- Log closed Wed May 18 00:00:50 2005