hostap: Host AP driver for Intersil Prism2/2.5/3 and WPA Supplicant1

Package available in: [6.0] [2.1]

This is a Linux driver for wireless LAN cards based on Intersil's Prism2/2.5/3 chipset. The driver supports a so called Host AP mode, i.e., it takes care of IEEE 802.11 management functions in the host computer and acts as an access point. This does not require any special firmware for the wireless LAN card. In addition to this, it has support for normal station operations in BSS and possible also in IBSS. WPA and RSN (WPA2) is supported when used with accompanied tools, wpa_supplicant (WPA/RSN Supplicant) and hostapd (WPA/RSN Authenticator).

... part of T2, get it here

URL: http://hostap.epitest.fi/

Author: Jouni Malinen <jkmaline [at] cc [dot] hut [dot] fi>
Maintainer: The T2 Project <t2 [at] t2-project [dot] org>

License: GPL
Status: Stable
Version: 0.3.7

Remark: Does not allow parallel builds.

Download: http://hostap.epitest.fi/releases/ hostap-utils-0.3.7.tar.gz
Download: http://hostap.epitest.fi/releases/ hostap-driver-0.3.7.tar.gz
Download: http://hostap.epitest.fi/releases/ hostapd-0.3.7.tar.gz
Download: http://hostap.epitest.fi/releases/ wpa_supplicant-0.3.8.tar.gz

T2 source: hostap-driver_nodepmod.diff
T2 source: hostap.cache
T2 source: hostap.conf
T2 source: hostap.desc
T2 source: pkg_linux24_post.conf
T2 source: pkg_linux24benh_post.conf
T2 source: pkg_linux26_post.conf
T2 source: postlinux.conf

Build time (on reference hardware): 2417% (relative to binutils)2

Installed size (on reference hardware): 0.61 MB, 24 files

Dependencies (build time detected): bash binutils bzip2 ccache coreutils diffutils findutils gcc glibc grep linux-header make openssl sed sysfiles tar

Installed files (on reference hardware): n.a.

1) This page was automatically generated from the T2 package source. Corrections, such as dead links, URL changes or typos need to be performed directly on that source.

2) Compatible with Linux From Scratch's "Standard Build Unit" (SBU).