--- Log opened Thu Jul 28 00:00:00 2005 00:00 < mnemoc> it's ok 00:02 < karasz> svn diff target/mnemosyne/pkgsel/Development/devtools.ask 00:02 < karasz> it returns command prompt 00:02 < mnemoc> are you sure you did the changes on that tree? 00:03 < karasz> ok ok 00:03 < karasz> you know the parrot i am 00:03 < karasz> gues i am a goldfish too :D 00:04 < karasz> http://pastebin.com/322897 00:04 < karasz> here it is 00:04 < Veki> mnemoc: I started to build desktop target two nights ago and I found that glibs failed to build. IOn its error log is mentioned that it received SIGINIT Crtl-C and that it aborted. I do not hink that I pressed Ctrl-C, Is that enough to abort further building since many packages will fail to build without glibc, and continue simply by ./scripts/Build-Target -cfg foo 00:05 < mnemoc> the build wont continue after an error between stages 0 and 4 00:06 < Veki> hm, so you think that error was actually in stage 5 or so? 00:06 < mnemoc> using Create-ErrList -cfg $foo -remove $pkg you can reschedule failed packages 00:06 < mnemoc> i guess you Ctrl-C on 5-glibc 00:07 < Veki> hm I was not in town at all..., it is tsragne that it is written Crtl-C, maybe occassional spelling mistake 00:07 < Veki> OK, if I continue by ./scripts/BUild-Target -cfg foo what will happen. I need that since as you know I am writing detailed manual with troubleshooting 00:08 < mnemoc> :) 00:10 < Veki> I think that scripts should have detailed description, since obviously, they are powerful, and it is pitty if users will not have all their power at their fingertips 00:10 < Veki> I will do my best to provide them with hints how to use scripts. Maybe, iwill be annoying to you and someone else in asking questions, but this may be helpful for us and users 00:10 < Veki> :) 00:11 < mnemoc> ask whatever you need 00:11 < Veki> ok, thanks :) 00:12 < Veki> I started build process again and it goes well so far. I will report on any failures that I do now know to solve or understand 00:12 < Veki> if there will be anything confusing I will let you know 00:13 < Veki> I have to wake up early in the morning so I have to go now, cu tomorrow 00:13 < Veki> :) 00:14 -!- Veki [~veki@217.24.19.40] has quit ["leaving"] 00:15 < karasz> mnemoc: ? 00:15 < mnemoc> karasz: send the patches to the ML, with name, email and short description :) 00:16 < karasz> i was afraid you will say that... 00:17 < mnemoc> :) 00:22 < karasz> done 00:22 < keinek> hi i back 00:22 < keinek> :) 00:22 < mnemoc> hi pr0n-master 00:22 < karasz> how about that config file? 00:22 < karasz> hi keinek 00:23 < mnemoc> karasz: remove kdelibs, create the dir by hand and Build-Target 00:23 < mnemoc> i have to go 00:25 < _Ragnar_> question: why do we still run with zlib 1.2.2 ? 00:25 < _Ragnar_> when it has some security bugs which are fixed in 1.2.3 ? 00:26 < karasz> ok but who should be the owner? 00:27 < karasz> or i make it worls writable? 00:28 < karasz> mnemoc: i canot make dir because it says file exists... 00:33 < _Ragnar_> uhm ;p 00:33 < _Ragnar_> -> Building tools.cross/wrapper/cmd_wrapper. 00:33 < _Ragnar_> find: target/%: No such file or directory 00:33 < _Ragnar_> O_O 00:51 -!- morfoh [~jeru@p54BFDBE6.dip.t-dialin.net] has quit [Remote closed the connection] 00:56 < CIA-9> ragnar * r10745 /trunk/package/archiver/zlib/ (zlib-1.2.2-inftrees.patch zlib.desc): * update to zlib 1.2.3 due to potential buffer overflows in 1.2.2 01:01 < karasz> my guess is that someone creates the file config there and th ebuild process cannot create the directory config... 01:01 < karasz> any info is well accepted... 01:02 < karasz> anyone still up ? 01:04 < _Ragnar_> hi 01:04 < _Ragnar_> still the kde problem? 01:05 < karasz> hi yep 01:05 < karasz> still the kde... 01:08 < _Ragnar_> hmmm 01:08 < _Ragnar_> what did you do in between? 01:09 < karasz> i created the config directory by hand, renaming the file confog to config.old 01:09 < karasz> now kdelibs built 01:09 < karasz> i guess is ok now 01:09 < karasz> but anyway the problem should be solved... 01:10 < karasz> who knows who needs that config file and will not find it because i renamed it.... 01:10 < karasz> i will isuue a trac 01:10 < karasz> what do you think _Ragnar_ ? 01:17 < karasz> added trac 01:17 < karasz> http://trac.t2-project.org/ticket/53 01:36 < mnemoc> re 01:36 < mnemoc> _Ragnar_: bash 2? 01:36 < mnemoc> _Ragnar_: jsaw commited a hack for that two hours ago 01:37 < _Ragnar_> mnemoc: yea I updated to 3.0 01:37 < _Ragnar_> now it work 01:37 < _Ragnar_> works* 01:37 < _Ragnar_> that needs to get into the system check tho 01:37 < mnemoc> _Ragnar_: jsaw did it 01:37 < _Ragnar_> ;) 01:38 < mnemoc> the fix 01:38 < mnemoc> i did the bug 01:38 < mnemoc> r10742 01:38 < _Ragnar_> oooh O_O 01:39 < mnemoc> if base=2 use this, else use mine 01:44 < _Ragnar_> I already updated to 3.0 01:44 < _Ragnar_> btw any idea why subversion in its make swig_pl wouldn't pick up the perl header files? 01:46 < mnemoc> no idea 03:05 -!- sepp_ [~sepp@p213.54.192.153.tisdip.tiscali.de] has joined #t2 03:22 -!- sepp [~sepp@p213.54.193.102.tisdip.tiscali.de] has quit [Read error: 110 (Connection timed out)] 03:22 -!- sepp_ [~sepp@p213.54.192.153.tisdip.tiscali.de] has quit [Read error: 104 (Connection reset by peer)] 03:22 -!- sepp [~sepp@p213.54.192.153.tisdip.tiscali.de] has joined #t2 03:40 -!- sepp_ [~sepp@p213.54.198.225.tisdip.tiscali.de] has joined #t2 03:40 -!- karasz [~root@80.97.102.202] has quit [Read error: 104 (Connection reset by peer)] 03:52 < Shingo--> hi 03:53 < Shingo--> I have a question. how to control the packages will be build? 03:54 < _Ragnar_> in the Config, you can select custom package selection 03:55 < _Ragnar_> and then put lines into the pkg config, like '- pam' will disable the pam package 03:57 -!- sepp [~sepp@p213.54.192.153.tisdip.tiscali.de] has quit [Read error: 110 (Connection timed out)] 03:58 < _Ragnar_> or '- gnome*' will disable all of gnome 03:59 < mnemoc> - removes, O disables 04:00 < _Ragnar_> oh yes, sorry 04:00 < mnemoc> something disabled can be enabled later, something removed will never exist 04:00 < _Ragnar_> my favorite line: '- dietlibc' :D 04:00 < mnemoc> :) 04:02 -!- sparc-kly [~mubex@dpc6744108173.direcpc.com] has joined #t2 04:26 -!- sparc-kly [~mubex@dpc6744108173.direcpc.com] has quit [Read error: 104 (Connection reset by peer)] 05:07 < Shingo--> thanks for answers. :-) 05:14 -!- mtr_ [~Michael@p54AF91D3.dip0.t-ipconnect.de] has joined #t2 05:25 -!- mtr [~Michael@p54AFAE70.dip0.t-ipconnect.de] has quit [Read error: 110 (Connection timed out)] 06:36 -!- keinek_ [~keinek@201.254.8.221] has joined #t2 06:54 < mnemoc> keinek: did you start a build of red-handed over rc2? 06:54 < mnemoc> keinek: (the tagged version) 06:54 -!- keinek [~keinek@201.254.15.215] has quit [Read error: 110 (Connection timed out)] 07:23 -!- keinek__ [~keinek@201.254.8.204] has joined #t2 07:30 -!- keinek_ [~keinek@201.254.8.221] has quit [Read error: 60 (Operation timed out)] 07:32 -!- Shingo-- [~shingo@mercantile.wb.com.br] has quit ["Download Gaim: http://gaim.sourceforge.net/"] 07:41 -!- morfoh [~jeru@p54BFFAE4.dip.t-dialin.net] has joined #t2 07:41 < morfoh> moin 07:42 < mnemoc> moin morfoh 08:25 < mtr_> moin 08:25 -!- mtr_ is now known as mtr 08:35 < morfoh> moin mtr 08:36 < morfoh> mtr: sorry I had not time for testing your patch yet 08:36 < morfoh> mtr: does it work smoothly there ? 09:24 < mtr> moin morfoh 09:25 < mtr> morfoh: no problems so far, but a x86_64 build would be interesting ... 09:27 < morfoh> indeed that would be nice :) 09:27 < morfoh> mtr: do you have a amd64 machine there for testing ? 09:27 < mtr> morfoh: and i expect some troubles if $SDECFG_CROSSBUILD=1 09:28 < mtr> morfoh: no x86_64 here :( 09:28 < _Ragnar_> aww ok 09:28 < morfoh> _Ragnar_: moin 09:28 < _Ragnar_> did you see that the cross-build from 32 to 64 has problems, rxr? 09:28 < morfoh> _Ragnar_: rxr is in holyday :) 09:29 < _Ragnar_> oooh ok 09:29 < _Ragnar_> didn't know that 09:29 < _Ragnar_> I'll try to spend more time with _64 after defcon 09:30 < morfoh> _Ragnar_: :) 09:30 < mtr> _Ragnar_: minto had some troubles with dietlibc 09:30 < mtr> 12:29 < minto> i386/start.S: undefined reference to `_dyn_start' 09:30 < _Ragnar_> same with me 09:30 < morfoh> Ragnar / mtr minto offered some cpu cycles too 09:30 < mtr> and i got the same error if building with uclibc 09:30 < _Ragnar_> I now have '- dietlibc' in each of my Configs 09:31 < _Ragnar_> ;p 09:31 < _Ragnar_> that fails embutils and minised tho but those seem to be used on the initrd only (?) 09:31 < mtr> in trunk we heavily depend on dietlibc, due to mebutils and mkinitrd stuff ... 09:31 < morfoh> minto will be away for 4 days ... and he offered to let "noisy" machine switched on :) 09:31 < mtr> _Ragnar_: ;) 09:31 < _Ragnar_> yea I don't use initrd 09:32 < _Ragnar_> yea my bfs computer at work now is a athlon 64 ... it's easier to keep it running there where no one hears ;) 09:32 < morfoh> :) 09:34 < _Ragnar_> okay off to bed, nini 09:34 < morfoh> sleep well 09:34 < _Ragnar_> thanks ;) same to you, later on :) 09:34 < mtr> gn8, _Ragnar_ 09:38 < mtr> morfoh: you have access to mintos "noisy" beast? could you give the patch a try if you have some spare time? 09:39 < morfoh> mtr: yes ... I've access to it 09:40 < morfoh> mtr: I can give it a try ... perhaps this evening. but I don't know if it will be possible because I move to a new flat this weekend 09:40 < morfoh> mtr: what should I test ... a diet embedded target ? 09:41 < morfoh> mtr: or just on a "normal" target ? 09:43 < morfoh> mtr: but I think if you've doubts regarding cross-compile the embedded target would be problematic 09:43 < mtr> morfoh: a generic minimal would be fine, the failure was in stage 1 09:43 < morfoh> mtr: ok 09:44 < mtr> morfoh: yep, embedded target would not hit it 09:44 < morfoh> mtr: and afaik there are not amd64 embedded boards yet ;) 09:45 < morfoh> mtr: just kidding :) 09:45 < mtr> :) 09:46 < morfoh> mtr: ok ... I've to proceed with my relocation work 09:46 < morfoh> mtr: but I'll stay online, anyway ;) 09:46 < mtr> if these beasts are that noisy i would embed an athlon64 into the cellar ;) 09:47 < morfoh> mtr: yes ... or at a datacenter :) 09:49 < morfoh> mtr: but anyway, I'll work on the dietlibc based stuff the next week again more often. If you see some other problems don't hesitate to drop me a note ;) 09:49 -!- Shingo-- [~shingo@mercantile.wb.com.br] has joined #t2 09:50 < mtr> morfoh: thinking about the test, a desktop target would be better, as the error occurs for pkgs that statically link to dietlibc, like udev and embutils 09:50 < mtr> morfoh: ok 09:51 < morfoh> mtr: ack ... but for the first I've to finish the small "diet firewall" and a "diet server" which can be used as a base for a "diet desktop" too 09:52 < morfoh> mtr: and with the lately introduced "nested target" stuff it should be easier to maintain all this different "flavours" ;) 09:54 < morfoh> mtr: btw, do you plan sth. like a ditelibc based desktop yet ? 09:55 < morfoh> mtr: I think this would be a hard task atm. 09:55 < morfoh> mtr: at least if you plan to do it dietlibc only :) 09:55 < mtr> morfoh: no no, no plans for this 09:55 < morfoh> mtr: so what's your goal ? 09:56 < mtr> but trunk heavily depends on dietlibc, and it did not work for me 09:57 < morfoh> mtr: ah ok ... yes improving dietlibc is mandantory for me too. I like it and I prefer it over uclibc 09:57 < mtr> embutils and minised do not link without dietlibc, and all targets with linux2x-initrd pull dietlibc in 09:57 < morfoh> ack 09:58 < mtr> udev even does not compile with dietlibc anymore 10:00 < mtr> i already wrote some patches, but the whole dietlibc dependancy is something i am not really happy with 10:01 < morfoh> mtr: why aren't you happy with the diet dependencies ? 10:02 < morfoh> mtr: ok ... the issues should be solved ... but do you see some problems with dietlibc ? 10:03 < mtr> morfoh: no, no problems with some specific libc - but it should be possible to choose ONE of those 10:04 < morfoh> mtr: ack, indeed this smart integration would be nice 10:04 < mtr> if you want to build with glibc, fine - want to use the "ugly" uclibc replacement, why not ? 10:04 < morfoh> mtr: yep 10:06 < morfoh> mtr: unfortunately the dietlibc stuff was a bit "mistreated" for some times 10:07 < morfoh> mtr: does you udev patch for dietlibc is working ? 10:08 < mtr> there was a good reason for rxr to do it this way, during work on @live, but for other targets it's not really an improvement 10:08 < morfoh> mtr: if you want I can included it in the next "test session" ;) 10:08 < mtr> udev patch replaces strnlen by strlen, which should be fine if the config files are written well ;) 10:08 < morfoh> mtr: yep, no question. I didn't wanted to say that it had no reasons ;) 10:09 < morfoh> mtr: hehe :) 10:11 < mtr> morfoh: written well == file is ascii text with limited line length 10:11 < mtr> which is true for all t2 template files 10:57 -!- sepp_ [~sepp@p213.54.198.225.tisdip.tiscali.de] has quit [Remote closed the connection] 11:09 -!- sepp [~sepp@p213.54.198.225.tisdip.tiscali.de] has joined #t2 11:09 < sepp> moin 11:10 < morfoh> moin sepp ... from nudossi country :) 11:11 < sepp> moin morfoh from "currywurst country" :) 11:14 < morfoh> sepp: that was a bad move my friend :) 11:15 < sepp> hmm how should i call it? 11:15 < sepp> kebab capital? 11:16 -!- dsoul [darksoul@vice.ii.uj.edu.pl] has quit [Remote closed the connection] 11:26 -!- dsoul [darksoul@vice.ii.uj.edu.pl] has joined #t2 11:30 < morfoh> sepp: hmmm ... dunno. call it as you want. I wasn't born here anyway :) 12:12 -!- karasz [~root@80.97.102.202] has joined #t2 12:13 * karasz is jumping around screaming yupiyee yupiyoo yupiyyyyyy 12:13 < karasz> good morning guys 12:15 < morfoh> karasz: good morning .... did you forgot your medecine ? :) 12:15 < karasz> nope i do not take medicine 12:15 < karasz> :D 12:16 < karasz> but mnemokde buit fawlesly in the end... 12:16 < karasz> I issued a ticket though 12:16 < morfoh> karasz: good man :D 12:17 < karasz> http://trac.t2-project.org/ticket/53 12:17 < sepp> i build a mnemokde - no strange kdelib config error 12:18 < karasz> i didn't understood that error very well so it may be my fault but i did not created manualy that file for sure.. 12:19 < sepp> btw hi karasz 12:19 < karasz> hi sepp 12:19 < karasz> anyway i created a nice introduction to mr. mnemoc :D 12:29 < karasz> now what? 12:30 < karasz> stuff builds nice and i don't know what to do next...:( 12:30 < sepp> ./scripts/Create-ISO 12:31 < karasz> yes that seems logical... 12:32 < morfoh> karasz: did you build a bootdiskt target too ? 12:32 < morfoh> you'll need it to create a bootable CD 12:34 < karasz> 320076K 12:34 < karasz> yes mr.morfoh i did create a boot target 12:35 < karasz> Creat-ISO t2mnemokde boot mnemokde 12:35 < karasz> 1 iso file of 320076K 12:35 < morfoh> karasz: with kde ? 12:36 < karasz> yes 12:36 < morfoh> hmmm ... that's looking a bit small. but anyway take a look if it installs all your needed stuff :) 12:36 < karasz> kdelibs kdebase firefox thunderbird they are all in the iso 12:36 < morfoh> ah! ok 12:37 < karasz> morfoh: i have a spare partition of 7gb on my hdd 12:37 < morfoh> but kdebase kdelibs will not "deliver" a fully functional kdedesktop anyway 12:37 < karasz> pclinuxos is using lilo :( 12:38 < karasz> hmmm what should i add to make it functional? 12:38 < morfoh> karasz: I don't know ... it depends what you want to do with it 12:39 < karasz> i have to log in in descktop, and be able to install konversation use firefox and thunderbird... 12:39 < karasz> konversation or any gui based irc client for that matter... 12:40 < morfoh> karasz: a good way could be to take a look into package/kde/ ... and figuring out what you could install additionally 12:40 < morfoh> anyway ... you can emerge them later too :) 12:40 < karasz> i will do that 12:40 < karasz> i have subversion so it couldn't be so hard... i guess 12:40 < karasz> about install 12:41 < karasz> i told you that i have a spare partition which i intend to use 12:41 < karasz> i will boot the cd 12:41 < karasz> install on spare partition 12:41 < karasz> but it seems i am stuck with lilo 12:41 < sepp> i want "a spare partition" too 12:41 < karasz> i must instruct the existing lilo 12:42 < karasz> to be able to boot t2 partition 12:42 < karasz> and i nust make sure that t2 instalation doesn't mess up the existing boot stuff 12:43 < sepp> it wont if you don't run the lilo setup in the stone menu 12:45 < karasz> i will give it a try 12:45 < karasz> brb 12:45 -!- karasz [~root@80.97.102.202] has quit ["Konversation terminated!"] 13:50 -!- sparc-kly [~mubex@dpc6744108173.direcpc.com] has joined #t2 13:56 -!- sparc-kly [~mubex@dpc6744108173.direcpc.com] has quit [Read error: 104 (Connection reset by peer)] 14:00 -!- karasz [~root@80.97.102.202] has joined #t2 14:01 < karasz> i am back 14:01 < karasz> hi mr. mnemoc 14:01 < karasz> mr morfoh ... stoll in? 14:01 < karasz> stoll -still 14:02 < karasz> mr sepp ?? 14:05 < sepp> pong :) 14:08 < karasz> i need a litle help with lilo 14:08 < karasz> i installed myt2 on the spare partition 14:08 < karasz> didn't touch stone lilo 14:08 < karasz> now i must tell my lilo to boot myt2 too 14:09 < karasz> i gues first i have to mount that partition to gather data from it... 14:10 < sepp> hmm lilo i have not used it loooong time 14:11 < karasz> same here 14:11 < karasz> last time it was suse 7.2 i guess..... 14:20 < morfoh> karasz: try running "stone" if you can 14:21 < morfoh> if you haven't booted a t2 try to chroot to the partition where it's installed 14:21 < karasz> slowly pleas mr. morfoh 14:22 < karasz> riht now i am back in pclinux, mounted the t2 partition to take a peek 14:22 < karasz> and i am a little uncertain of what to do next... 14:22 < morfoh> karasz: sorry ... cannot be slowly at, ... I've to prepare things for my relocation 14:23 < karasz> ack 14:23 < karasz> :) 14:23 < karasz> basicaly i must edit /etc/lilo.conf in pclinux to add an entry for t2 14:24 < karasz> is that right? 14:39 < karasz> guys if i won't be back in 5 finutes it means that my comp has gone to hell, trying to boot t2 14:39 < karasz> keep your fingers crossed for me 14:39 -!- karasz [~root@80.97.102.202] has left #t2 ["Konversation terminated!"] 14:53 -!- karasz [~chatzilla@80.97.102.202] has joined #t2 14:53 < karasz> guys i am back 14:53 < karasz> can anyone give me the command to svn ... 14:54 < karasz> svn co http://????? 14:54 < karasz> morfoh: i am in :D 14:54 < karasz> mnemokde sort of works ... 14:55 < karasz> i mean it does not have X yet but i will get there... 15:04 < morfoh> karasz: you happy one ... if you're in ;) 15:07 < CIA-9> mtr * r10746 /trunk/package/kde/koffice/koffice.desc: * updated koffice (1.4.0a -> 1.4.1) 15:07 < CIA-9> mtr * r10747 /trunk/package/kde/koffice-i18n/koffice-i18n.desc: * updated koffice-i18n (1.4.0 -> 1.4.1) 15:10 < CIA-9> mtr * r10748 /trunk/package/security/clamav/clamav.desc: 15:10 < CIA-9> * updated clamav (0.86.1 -> 0.86.2) 15:10 < CIA-9> Security Update 15:37 < karasz> guys i am getting milestones here and no one here to who i can brag to... :( 16:06 < CIA-9> mtr * r10749 /trunk/package/kde/koffice/koffice.desc: * koffice NOPARALLEL flag removed 16:14 < karasz> mr morfoh i am in but from windooze 16:14 < karasz> i can't get X to work 16:15 < karasz> say could not find screen 16:37 < morfoh> karasz: take a look into /etc/X11/xorg.conf <-- you have to configure it for your system 16:45 < karasz> i am lookin at it 16:46 < karasz> it may be usefull to know that i have another err saying i do not have AGP GART compiled in kernel 16:47 < karasz> i am doomed again?? 16:53 -!- root [~root@80.97.102.202] has joined #t2 16:53 -!- karasz [~chatzilla@80.97.102.202] has quit ["Chatzilla 0.9.68.5 [Firefox 1.0.6/20050716]"] 16:54 -!- root is now known as karasz 16:54 < karasz> hello guys 16:55 < karasz> clear 16:55 < karasz> finaly i am in from T2 16:56 < karasz> no X but still I am gattin close to `home` :) 16:57 -!- keinek__ is now known as keinek 16:57 < karasz> hi mr. keinek 16:57 < keinek> hi karasz 16:58 < karasz> still struggeling a little witc ircii but still 16:58 < karasz> finaly i built an almost usable T2 16:59 < karasz> and it took what like 1 and a half week from ground 0 16:59 < karasz> it is not bad i guess 17:00 < karasz> if anybody whishes to enlight me about X feel free to contact me :D 17:02 < karasz> guys, anybody here because i am a little blind with this ircii... 17:04 < sepp> karasz: check /var/log/xorg 17:04 < karasz> i did 17:04 < karasz> 2 errors 17:05 < karasz> 1 AGP GART not built? cannot find /dev/agpgart 17:05 < karasz> 2 found screen but not usable 17:06 < karasz> i have an onboard video which to my best knowledge is Intel i810 17:08 -!- Netsplit tolkien.freenode.net <-> irc.freenode.net quits: valentin, _Ragnar_ 17:09 -!- Netsplit over, joins: _Ragnar_ 17:09 -!- Netsplit over, joins: valentin 17:12 < karasz> clear 17:12 -!- minto [~chatzilla@82-217-66-7.cable.quicknet.nl] has joined #t2 17:12 < minto> hi all 17:12 < karasz> hello mr minto 17:12 < sepp> hi minto 17:12 < karasz> did you hear the great news? 17:13 < minto> What news? 17:13 < minto> rc2? 17:13 < karasz> parrot has succesfuly built an almost usable T2 :D 17:13 < minto> Well done parrot, you're a mr too now :-) 17:14 < karasz> it is a loong way to that yet... :( 17:14 < karasz> no X for me yet :( 17:15 < karasz> no AGPGART in kernel.... ??? 17:15 < karasz> is this fatal? 17:18 < karasz> hmmm.... 17:18 < karasz> i will do a very not proffesional thing 17:19 < karasz> i will overwrite the xorg.conf of T2 with that from my working pclinux 17:19 < karasz> let's see what will happen 17:26 < mnemoc> moin 17:26 < karasz> moin mr mnemoc 17:26 < mnemoc> hi parrot 17:26 < karasz> :D 17:27 < mnemoc> :) 17:27 < karasz> I am almost there mr mnemoc 17:27 < mnemoc> good :) 17:27 < karasz> no X yet but other than that everything is good 17:27 < mnemoc> why not X? what did you build? 17:27 < karasz> what can you tell me abt AGPGART? 17:28 < karasz> mnemosyne with kde 17:28 < karasz> startx fails with 2 errs 17:28 < mnemoc> did you configure your X? 17:28 < karasz> 1. no AGPGART found in kernel 17:28 < karasz> yes 17:28 < karasz> automatic doesn't work neither does the first option 17:29 < sepp> hi mnemoc 17:29 < karasz> only the third way of config works 17:29 < mnemoc> what lspci said about your card? 17:29 < mnemoc> hi sepp 17:30 < karasz> Intel board 17:30 < karasz> 82815 17:31 < karasz> CGC rev 04 17:32 < karasz> but my problem is /dev/agpgart 17:32 < karasz> which dowsn't exist 17:32 < karasz> taht's why the first config option for X11 from stone failed 17:33 < karasz> is there a way to add that module in kernel or i have to re-compile? 17:36 -!- mnemoc_ [~amery@200.75.27.43] has joined #t2 17:37 < minto> Anyone a clue why quagga does not build on trunk? 17:37 < mnemoc_> what the error log say? 17:38 < minto> something with expr and sysv_nice 17:38 < minto> I am rebuilding and threw the old log away. 17:39 < karasz> uys what should I do about /dev/agpgart? 17:40 < mnemoc_> karasz: minute 17:40 < karasz> ok 17:40 < karasz> i will shut up and wait... :D 17:41 < mnemoc_> karasz: can you paste me your agpgart lspci? 17:41 < mnemoc_> kernel doesn't include any config option like that 17:41 < minto> mnemoc: Log says: 17:41 < minto> ====[pkg_sysvinit_install_init:25 (last $?=0)> expr 100 - sysv_nice 17:41 < minto> expr: non-numeric argument 17:42 < mnemoc_> minto: the .init may be badly formed 17:42 < mnemoc_> minto: not priority defined 17:42 < mnemoc_> no* 17:43 < mtr> minto: quagga lacks the .init files, seems this is copy'n'pasted from zebra ... 17:43 < mtr> re, btw 17:43 < mnemoc_> :) 17:43 < mnemoc_> mtr: who did it? :) 17:44 < minto> What is needed to fix it? 17:44 < karasz> mnemoc_ lspci does not contain agpgart 17:44 < mtr> i guess morfoh wanted to clean this up by time ... 17:44 < mnemoc_> minto: add the right init, or remove the call to install it 17:45 < mnemoc_> karasz: can you paste me your entire lspci? 17:45 < karasz> yes if you can tell me how to use ircii 17:45 < karasz> my hands are tied and i am blind 17:46 < karasz> i have on console 1 the output and on console 2 ircii 17:46 < mnemoc_> the only AGP things which our linux26 package doesn't build are: AMD_K8, NVIDIA and ATI 17:46 < karasz> and other that copy to paper and from paper i cannot think of anything else 17:47 < karasz> i will do the copy :( 17:47 < mnemoc_> i guess your module is third party 17:47 < mnemoc_> and it has not been added to T2 17:47 -!- mnemoc [~amery@200.75.27.6] has quit [Read error: 110 (Connection timed out)] 17:48 < mnemoc_> karasz: what video card does lspci say you have? 17:49 < karasz> 0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controler Hub (rev 04) 17:49 < karasz> now VGA 17:50 < mnemoc_> use i810 driver on xorg config 17:51 < karasz> i use it now 17:51 < karasz> i810 17:51 < karasz> so VGA 17:51 < mnemoc_> lspci | grep -i ' vga' <-- really empty ? 17:52 < karasz> 000:00:02.0 VGA Compatibile controler : Intel Corp. 82815 CGC [Chipset Graphics Controler] (rev 04) 17:53 < mnemoc_> i810 then 17:54 < karasz> yes 17:55 < karasz> in xorg config i have i810 17:55 < karasz> but when statx i got some errors then it gives up 17:55 < karasz> first error comes from GARTInit 17:55 < karasz> Unable to open /dev/agpgart 17:56 < karasz> no such file or directory 17:56 < karasz> then I810(0) say AGP GART support is not available 17:57 < karasz> make sure that your kernel has agpgart support 17:57 < karasz> or that the agpgart kernel module is loaded 17:57 < mnemoc_> oh 17:57 < karasz> modprobe agpgart say FATAL module agpgart not foind 17:58 < karasz> so it is obvious that i messed up stuff again :) 17:58 < mnemoc_> nope 17:58 < karasz> but that's just me the parrot which you will grow to like ...:D 17:59 < karasz> or not... :( 18:06 < mnemoc_> karasz: load intel-mch-agp.ko 18:06 < karasz> :) 18:06 < karasz> tried that 18:07 < karasz> it loaded 18:07 < karasz> no difference 18:07 < mnemoc_> drm.ko ? 18:07 < mnemoc_> :\ 18:07 < mnemoc_> i810fb.ko ? 18:08 < mnemoc_> grep -ir agpgart /lib/modules/2.6.* 18:09 < karasz> i did the grep 18:09 < karasz> now what? 18:10 < karasz> you want to know the modules? 18:10 < mnemoc_> no, try loading them :( 18:11 < karasz> i loaded drm, i810fb 18:11 < karasz> nothing 18:11 < karasz> although 18:11 < karasz> when i load i810fb it is used by vgastate 18:11 < karasz> all the others are not used 18:13 < mnemoc_> try i810fb and fb on X 18:15 < karasz> how to unload modules? 18:15 < karasz> rmmod 18:15 < karasz> :) 18:17 < karasz> i didn't understand fb 18:17 < karasz> fb is a module 18:17 < karasz> gues not 18:17 < karasz> how to set X to use frame buffer mode? 18:19 < mnemoc_> fbdev is the X driver 18:19 < karasz> i should set it in xorg.conf? 18:20 < karasz> as video card? 18:20 < karasz> no /dev/fb0 18:20 < karasz> :( 18:22 < karasz> although i have directory /dev/fb which is empty 18:22 < mnemoc_> i don't remember how to set that :\ 18:22 < mnemoc_> try vesa :p 18:26 < karasz> cannot open /dev/mouse 18:26 < karasz> it seems i get past video card 18:26 < karasz> should I replace /dev/mouse with what? 18:26 < karasz> it is a ps2 mouse 18:27 < karasz> `/dev/input/mouse0` perhaps? 18:28 < karasz> i have that file... 18:29 < mnemoc_> /dev/input/mice is what i prefer 18:31 < karasz> oki 18:34 < morfoh> moin mnemoc_ :) 18:34 < mnemoc_> hi morfoh 18:37 < minto> morfoh: is that quagga garbage your work? 18:37 < minto> btw Hi 18:37 < mnemoc_> hehe 18:38 < karasz> moin morfoh 18:38 < karasz> mnemoc i used the vga module for card 18:38 < karasz> i gives me a 300 pixel rezolution which i cannot use offcourse 18:39 < karasz> vesa will be better? 18:39 < mnemoc_> yes 18:39 < karasz> ok 18:39 < mnemoc_> and don't forget to set the modes 18:41 < karasz> it is complete rubish 18:41 < karasz> like a broken TV 18:41 < mnemoc_> :( 18:42 < karasz> i think i messed up the modes... 18:44 < karasz> very rapid moving horizontal lines 18:45 < karasz> what did i mess up? 18:45 < karasz> vertical frequency or horizontal? 18:46 < minto> mnemoc_: where can I find this quagga init thing? 18:46 < mnemoc_> on quagga's confdir 18:47 < mnemoc_> karasz: ddcxinfo can give you that info if you don't have the specs of your monitor 18:48 < mnemoc_> karasz: ddcxinfo is a package 18:49 < morfoh> minto: what's up loud mouth ? :) 18:50 < minto> I get this on quagga build 18:50 < morfoh> what problem do you have with quagga ? 18:50 < minto> ====[pkg_sysvinit_install_init:25 (last $?=0)> expr 100 - sysv_nice 18:50 < minto> expr: non-numeric argument 18:50 < morfoh> minto: oh! ... I had no problems with it 18:51 < minto> I have no clue how to get it working? 18:51 < mnemoc_> does it have a .init? 18:51 < minto> nope 18:51 < morfoh> mnemoc_: quagga is a for of zebra and it uses the same init script afaik 18:51 < morfoh> it has an init 18:51 < mnemoc_> morfoh: not on trunk 18:52 < morfoh> what ? 18:52 < minto> :-) Who is a load mouth now? :D 18:52 < morfoh> mnemoc_: I# 18:52 < morfoh> I'll take a short look 18:53 < mnemoc_> morfoh: quagga is trying to install lot of .init which are _not_ on it's confdir 18:53 < morfoh> ouch! 18:53 < morfoh> moment 18:55 < morfoh> mnemoc_: / minto I'll fix it! ... 18:55 < minto> Great, now you are my friend again :-) 18:55 < mnemoc_> :) 18:55 -!- mnemoc_ is now known as mnemoc 18:55 < morfoh> minto: oh! I thought I were your friend yet :( 18:56 < minto> You we're up until you screwed up on quagga 18:56 < minto> But now you will fix it and all is well again 19:08 < _Ragnar_> moin moin 19:09 < CIA-9> sebastian * r10750 /trunk/package/mail/sylpheed/ (sylpheed.cache sylpheed.desc): * updated sylpheed (1.0.5 -> 2.0.0) 19:18 < morfoh> minto: what are you doing with quagga tha you complain that loud ? 19:18 < morfoh> minto: before I "screwed up" quagga it wasn't in the repo anyway ;) 19:23 < minto> trying a trun ref build :) 19:23 < karasz> guys i am on the vierge of givin up :(( 19:23 < morfoh> minto: good man :) 19:24 < minto> :D 19:24 < morfoh> minto: when you'll go on vacation ? 19:25 < karasz> guess nobody cares .... 19:25 < karasz> cu later 19:26 < morfoh> cu later 19:26 -!- karasz [~root@80.97.102.202] has left #t2 [] 19:41 < minto> morfoh: tomorrow (friday) just for a long weekend 19:41 < minto> How far is quagga? 19:45 < sepp> how long needs noisy for a ref build? 19:45 < minto> Dunno, I have to shut it down at the end of the day :( 19:46 < sepp> ahh i remember 19:58 < minto> Is anyone working on the update from the mailing list form the last couple of days? 20:21 < mnemoc> what updatE? 20:25 < minto> Just any from the ones on the update ML. I hava about 30 updates pending, just have to test if they will build 20:26 < _Ragnar_> O_O eeeeeps 20:26 < _Ragnar_> I have - hostap in my pkgsel 20:27 < _Ragnar_> and yet linux26 still tries to build with the hostap package/patch 20:27 < mnemoc> did you re-run Config after pkgseling hostap out? 20:27 < _Ragnar_> yes 20:27 < _Ragnar_> multiple times 20:27 < mnemoc> did the tools got rebuilt? 20:27 < _Ragnar_> yes 20:29 < mnemoc> grep hostap build/foo*/TOOLCHAIN/tools.*/lib/*linux26* 20:29 < _Ragnar_> no results 20:30 < mnemoc> o_O 20:30 < mnemoc> brb 20:31 < _Ragnar_> yea O_O weird 20:39 < _Ragnar_> uhm where did wiki.t2-project.org go to? 21:14 < mnemoc> to much spam 21:15 < _Ragnar_> oh ok :/ sucks 21:15 < mnemoc> i'm adding documentation on track 21:15 < mnemoc> trac 21:15 < mnemoc> until we get a real CMS 21:15 < _Ragnar_> ok 21:15 < _Ragnar_> any preferences for a CMS? 21:17 < _Ragnar_> friend asked me recently about a good one 21:17 < mnemoc> i like plone 21:18 < mnemoc> it's great at userlevel 21:18 < mnemoc> but a nightmare for the admins :p 21:26 < _Ragnar_> :) oh 21:26 < _Ragnar_> one time setup, or in general? 21:30 < mnemoc> on time 21:31 < _Ragnar_> okay 21:43 -!- minto [~chatzilla@82-217-66-7.cable.quicknet.nl] has quit [Read error: 110 (Connection timed out)] 21:44 -!- minto_ [~chatzilla@82-217-66-7.cable.quicknet.nl] has joined #t2 21:44 -!- minto_ is now known as minto 21:44 * minto is back 21:44 < sepp> wb minto :) 21:44 < minto> hi sepp 21:49 < minto> morfoh: any news on quagga? 22:13 -!- rxr_ [rene@e178186229.adsl.alicedsl.de] has joined #t2 22:13 -!- Topic for #t2: T2 | 2.1.0-rc2 TAGGED | The next generation of System Development Environments (SDE) | http://www.t2-project.org/ 22:13 -!- Topic set by mnemoc [] [Wed Jul 27 20:43:09 2005] 22:13 [Users #t2] 22:13 [ _Ragnar_] [ free_attitude] [ minto ] [ mtr] [ rxr_ ] [ Shingo--] 22:13 [ CIA-9 ] [ jsaw ] [ mnemoc] [ nzg] [ sepp ] [ valentin] 22:13 [ dsoul ] [ keinek ] [ morfoh] [ rxr] [ SerWou] [ Veki ] 22:13 -!- Irssi: #t2: Total of 18 nicks [0 ops, 0 halfops, 0 voices, 18 normal] 22:13 -!- Channel #t2 created Sun Aug 8 21:15:33 2004 22:13 -!- [freenode-info] please register your nickname...don't forget to auto-identify! http://freenode.net/faq.shtml#nicksetup 22:13 -!- Irssi: Join to #t2 was synced in 16 secs 22:23 -!- free_attitude [ivan@213.244.197.139] has quit ["Leaving"] 22:24 -!- rxr [rene@e178153027.adsl.alicedsl.de] has quit [Read error: 110 (Connection timed out)] 22:29 * minto is tired 22:29 < minto> I am off to bed, sleep well all. 22:29 -!- minto [~chatzilla@82-217-66-7.cable.quicknet.nl] has quit ["Chatzilla 0.9.68a [Firefox 1.0.4/20050511]"] 23:08 < morfoh> mnemoc: dvb-apps error 23:08 < morfoh> ==[build_this_package:718 (last $?=0)> echo 'Fixing ownership and permissions ...' 23:08 < morfoh> Fixing ownership and permissions ... 23:08 < morfoh> ==[build_this_package:719 (last $?=0)> chown -R 0:0 /TOOLCHAIN/src.dvb-apps.1122555893.16450.0/linuxtv-dvb-apps-2005-02-28 23:08 < morfoh> chown: cannot access `/TOOLCHAIN/src.dvb-apps.1122555893.16450.0/linuxtv-dvb-apps-2005-02-28': No such file or directory 23:08 < morfoh> Due to previous errors, no 5-dvb-apps.log file! 23:08 < morfoh> (Try enabling xtrace in the config to track an error inside the build system.) 23:10 < CIA-9> sebastian * r10751 /trunk/package/graphic/pixie/pixie.desc: * updated pixie (1.4.4 -> 1.4.5) 23:13 -!- Shingo-- [~shingo@mercantile.wb.com.br] has quit ["Download Gaim: http://gaim.sourceforge.net/"] 23:21 < mnemoc> morfoh: you cvs co failed 23:22 < morfoh> what cvs co ? 23:22 < morfoh> dvb-apps ? 23:22 < mnemoc> linuxtv-dvb-apps-2005-02-28 23:22 < mnemoc> that's the error 23:22 < mnemoc> empty untar 23:22 < morfoh> ok ... I can try to download it 23:22 < morfoh> again 23:22 < mnemoc> rsync://t2.geeks.cl/mirror 23:22 < mnemoc> get it from there 23:24 < morfoh> mnemoc: thanks ... but I've it now ;) 23:26 < mnemoc> :) 23:28 < morfoh> Scheduling package 'dvb-apps' for rebuild ... 23:36 < CIA-9> sebastian * r10752 /trunk/package/gnome2/abiword/abiword.desc: * updated abiword (2.2.8 -> 2.2.9) 23:45 < morfoh> == 07/28/05 23:35:17 =[5]=> Finished building package dvb-apps. 23:45 < morfoh> :) 23:45 < morfoh> I'll close the ticket 23:46 < mnemoc> :) 23:46 < mnemoc> you could compare your download with my mirror is you want to validate your files 23:46 < mnemoc> via rsync that's quick 23:50 -!- Shingo-- [~shingo@mercantile.wb.com.br] has joined #t2 --- Log closed Fri Jul 29 00:00:00 2005